Page 1 of 1

Brinly early plow need pics

Posted: Sun Aug 02, 2015 4:29 pm
by Farmallgray
Guys,
I'm looking for pics of original (unrestored) single hole Brinly plows. I thought I took pics of mine before I tore it apart but I can't seem to find them. I also thought I had some pics collectted and saved from the forums but I can't seem to find them either. I must be missing a cd or something. I thought I also had dimensions for the stabilzer plates for use with the Y sleeve hitch to make them.

I'd like to see what decals show up on the early plows and also what the serial numbers were. I do know mine had the Brinly decal that was black letters with a white outline and not the common oval decal.

I'm also wondering if the upright that connects the frog to the beam was black or white. It was black on the later plows but the Original and 70/100 sales brochures show it white (same pic in both brochures).

Re: Brinly early plow need pics

Posted: Mon Aug 03, 2015 8:56 am
by chzuck
I looked back through my saved photos from the IHRegistry and found this one. I will check mine to give you the dims of both legs of the angle.

Re: Brinly early plow need pics

Posted: Wed Aug 05, 2015 11:45 am
by chzuck
Farmallgray,
The info I have on the Y sleeve hitch adapter does not show stabilizer plates. Am I missing something? I have many of the CD's from the Registry and will search them if you like.

Re: Brinly early plow need pics

Posted: Sat Aug 08, 2015 6:25 am
by Farmallgray
I did some more digging and I did find the dimensions on the stabilzer plates.

I did some net searching and it looks like the early plows only had the Brinly decal on the land side (left) of the beam and just had the serial number decal
on the furrow side (right) of the beam.

Looks like the upright could be white on the earliest ones and black on the later ones.