K181 connecting rods
- ksanders
- Posts: 930
- Joined: Mon Sep 06, 2010 2:56 pm
- First and Last Name: Kevin Sanders
- Location: Sellersburg, Indiana
K181 connecting rods
I'm replacing an exploded connecting rod on a replacement 8hp motor. ID tag on the motor isn't readable. The rod number stamped into it is 41 059 04. All I find online, even in the parts look up over several years of motors is 41 067 10. I know there were a lot of subtle changes on the little 7 and 8 motors. Will the 41 067 10 rod work?
From the first Original to the last x82 Series... you can't beat an IH Cub Cadet!!!
Re: K181 connecting rods
41-067-10 and 41-067-08 (mahle) both have 41 059 04 stamped on the part.
- Attachments
-
- s-l1600.jpg (278.77 KiB) Viewed 3517 times
- ksanders
- Posts: 930
- Joined: Mon Sep 06, 2010 2:56 pm
- First and Last Name: Kevin Sanders
- Location: Sellersburg, Indiana
Re: K181 connecting rods
Perfect. Thanks for the help
From the first Original to the last x82 Series... you can't beat an IH Cub Cadet!!!
Re: K181 connecting rods
So the rod from a 161 and a 181 are interchangeable is what I gather from this, correct? A friend of mine was rebuilding one recently and we never did really get this figured out.
Cub Cadets, Just Like Lays Potato Chips, no one can own Just One ! ! ! !
Originalx7, 70x2, 100x2, 71, 102, 72x2, 149, 169, 1450 two stick, 782, 782D, Z-Force (yaller fever )
Originalx7, 70x2, 100x2, 71, 102, 72x2, 149, 169, 1450 two stick, 782, 782D, Z-Force (yaller fever )
- ksanders
- Posts: 930
- Joined: Mon Sep 06, 2010 2:56 pm
- First and Last Name: Kevin Sanders
- Location: Sellersburg, Indiana
Re: K181 connecting rods
The parts look up has completely different part numbers for the rod in A 7 and 8hp
From the first Original to the last x82 Series... you can't beat an IH Cub Cadet!!!
- Kelpie
- Posts: 68
- Joined: Sat Apr 16, 2011 2:38 pm
- First and Last Name: Russell McClure
- Location: Southport, IN
Re: K181 connecting rods
I don't think the rods for K161 and K181 are interchangeable. I think the K161 rod is longer than the K181 rod. I was rebuilding a K181 block and accidentially ordered a K161 rod and the piston extended above the top of the cylinder. Orderd a K181 rod and all is well.
Give a snake a brake
1964 Model 70 Dad bought new, creeper, 38" mower deck, fenders, lights, Brinley lift assist and sleeve hitch. Brinley plow.
1964 Model 70 Dad bought new, creeper, 38" mower deck, fenders, lights, Brinley lift assist and sleeve hitch. Brinley plow.
- BigMike
- Posts: 1359
- Joined: Mon Sep 06, 2010 8:45 pm
- First and Last Name: Mike Andrews
- Location: Niles,Michigan
Re: K181 connecting rods
Sounds like a good way to raise the compression