Has anyone on here had the motor apart on a Cub Electric Lift? Trying to remove the back cover and it appears stuck to the armature or something else in there. Motor is very noisy like it needs a bearing replaced.
Got the motor apart. brush end bushing is froze fast to the shaft. Anyone know where to get parts for these motors - need brushes.
Electric Lift Motor
- chzuck
- Posts: 364
- Joined: Tue Sep 07, 2010 2:51 pm
- First and Last Name: Charlie Zuck
- Location: Elizabethtown, PA
Electric Lift Motor
http://www.zucksrototillers.com
There is only ONE ROTOTILLER.
147 with 48" mower deck & 42" QA snow thrower
70 with 42" mower deck, 42" blade, & Brinly 10" plow
There is only ONE ROTOTILLER.
147 with 48" mower deck & 42" QA snow thrower
70 with 42" mower deck, 42" blade, & Brinly 10" plow
- chzuck
- Posts: 364
- Joined: Tue Sep 07, 2010 2:51 pm
- First and Last Name: Charlie Zuck
- Location: Elizabethtown, PA
Re: Electric Lift Motor
Finally got the motor apart and brush end bushing removed. Also found a source for brushes and some other parts. See link below. I should have a good lift when done. Rebuilt the mechanical part and will have a good motor.
http://www.ccspecialties.org/eliftparts.html
http://www.ccspecialties.org/eliftparts.html
http://www.zucksrototillers.com
There is only ONE ROTOTILLER.
147 with 48" mower deck & 42" QA snow thrower
70 with 42" mower deck, 42" blade, & Brinly 10" plow
There is only ONE ROTOTILLER.
147 with 48" mower deck & 42" QA snow thrower
70 with 42" mower deck, 42" blade, & Brinly 10" plow