Front Wheel Bearings

Here is where we can talk about all things Cub and then some. Please follow the golden rule and respect others.
This is a free forum and all pictures posted here are for public consumption. They are free to be used as long as you are not using them in a for-profit manner. Also, any pictures subject to copyright or permissions will be removed.
Post Reply
User avatar
chzuck
Posts: 362
Joined: Tue Sep 07, 2010 2:51 pm
First and Last Name: Charlie Zuck
Location: Elizabethtown, PA

Front Wheel Bearings

Post by chzuck »

Anyone know of an after market source for front wheel bearings for a 1650?
http://www.zucksrototillers.com
There is only ONE ROTOTILLER.
147 with 48" mower deck & 42" QA snow thrower
70 with 42" mower deck, 42" blade, & Brinly 10" plow

User avatar
ReicheP
CCC's Official Weatherman
Posts: 983
Joined: Wed Sep 08, 2010 7:58 pm
First and Last Name: Paul Reiche
Location: Some where over the rainbow, PA

Re: Front Wheel Bearings

Post by ReicheP »

any auto parts store.

See the FAQ's for part numbers.

faq.php?mode=cubfaq#f0r16
DUI Offenders murder the equivalent of two 747 crashes in the USA each week!

682 W/44" Deck, 1650 W/Snow Blade, 1811 W/450, 1650 Barn Find

User avatar
chzuck
Posts: 362
Joined: Tue Sep 07, 2010 2:51 pm
First and Last Name: Charlie Zuck
Location: Elizabethtown, PA

Re: Front Wheel Bearings

Post by chzuck »

ReicheP wrote:any auto parts store.

See the FAQ's for part numbers.

faq.php?mode=cubfaq#f0r16
Thank you much, I need to save that page to my favorites.
http://www.zucksrototillers.com
There is only ONE ROTOTILLER.
147 with 48" mower deck & 42" QA snow thrower
70 with 42" mower deck, 42" blade, & Brinly 10" plow

mortten
Posts: 101
Joined: Mon May 02, 2011 2:41 pm
First and Last Name: Doug Anderson
Location: Peninsula, OH

Re: Front Wheel Bearings

Post by mortten »

Could have 3/4" or 1" hearings. Check before you go.

User avatar
chzuck
Posts: 362
Joined: Tue Sep 07, 2010 2:51 pm
First and Last Name: Charlie Zuck
Location: Elizabethtown, PA

Re: Front Wheel Bearings

Post by chzuck »

It is 3/4", which surprised me as I thought it would have been 1". I noted in the parts lookup you needed to know your serial number if you had not removed the wheel first.
http://www.zucksrototillers.com
There is only ONE ROTOTILLER.
147 with 48" mower deck & 42" QA snow thrower
70 with 42" mower deck, 42" blade, & Brinly 10" plow

Post Reply