Page 1 of 1
82 series replacement ignition switch
Posted: Mon Jan 15, 2018 9:21 am
by Dave C
Has anyone found a suitable replacement switch for the 82 series besides OEM.
When u punch in the part number 725-3086 you get alot of hits ebay etc but the pinouts are not correct on any of them.
Re: 82 series replacement ignition switch
Posted: Mon Jan 15, 2018 4:21 pm
by dag1450
Try 925-3021. I think that's the one for 82s.
Re: 82 series replacement ignition switch
Posted: Mon Jan 15, 2018 6:04 pm
by Jlaws
Not all 82 series use the same switch . The 582 uses a different switch than say a 782 . And it also makes a difference if you have a series one or the later magnum engine in say a 682 or 782 . It depends on if it has a magneto or coiled ignition . There were engine changes made during the production run .
Dave which 82 do you have and what is its serial number ?
Re: 82 series replacement ignition switch
Posted: Mon Jan 15, 2018 6:34 pm
by dag1450
Yeah....I went out on a limb and assumed it was not a 582....lol.
925-3026 covers 582....and like 1811 1872 2072. Not sure how or why. Like Jess said...I guess more details r needed.
Re: 82 series replacement ignition switch
Posted: Tue Jan 16, 2018 1:05 pm
by JMotuzick
He and I talked yesterday, he’s working on a 2072. I offered him a used one, all he needs to do is stop over and set up a WiFi in my shop! Plus I trucked some parts back for him from ray, you would think he could find a few minutes....
Re: 82 series replacement ignition switch
Posted: Wed Jan 17, 2018 10:33 am
by cholloway
I offered him a used one, all he needs to do is stop over and set up a WiFi in my shop! Plus I trucked some parts back for him from ray, you would think he could find a few minutes....
What... you can't turn-on a router???... it's wireless!!!
Re: 82 series replacement ignition switch
Posted: Wed Jan 17, 2018 4:39 pm
by JMotuzick
I wish it was that easy! The house is fine but the shop is to far away and the WiFi won’t reach. Added a under ground line when we where digging for a new water line. The new service is a wireless acces point. It’s not plug and go and after a hour messing with IP address I gave up!
Re: 82 series replacement ignition switch
Posted: Sat Jan 20, 2018 6:31 am
by dag1450
Joe.... how many feet are you talking from router to the shop? They make extenders that work pretty good. I have a short one just to cover my house and surrounding area. I think they make for longer length too. Your cable does sound like a better idea....if you can get it hooked up.
Re: 82 series replacement ignition switch
Posted: Sat Jan 20, 2018 9:41 am
by JMotuzick
Dag +-300 feet I bought a high end router in 2016 I get 1 bar if I by the door. Off and onto Lte if I’m not. Of course only one bar ofthat too!
Re: 82 series replacement ignition switch
Posted: Sat Jan 20, 2018 1:10 pm
by Dave C
So after some research i did find that the switch from a cyclops as joe said will work. same pinout. Also aftermarket replacements for those are readily available. Still not sure why they show the replacement for the 2072 type switch as not having the right pinout.