The 100 reincarnation

Here is where we can talk about all things Cub and then some. Please follow the golden rule and respect others.
This is a free forum and all pictures posted here are for public consumption. They are free to be used as long as you are not using them in a for-profit manner. Also, any pictures subject to copyright or permissions will be removed.
Post Reply
Klapatta
Posts: 1129
Joined: Mon Sep 06, 2010 2:25 pm
First and Last Name: Kenneth LaPatta
Location: Rockingham VT.

The 100 reincarnation

Post by Klapatta »

It was five years ago when I parked the 100 under the deck and covered it up with a tarp. Since then it has languished under the deck awaiting it's day. It ran well the day I parked it there and it will run well again when I drive it out of there soon enough. As a backstory I should mention that I bought this Cub on the day after Thanksgiving 1984.
Over the years the little 100 has worn many hats, it's last life was as a stock class pulling tractor for about eight years. Before that it served as firewood hauler. As time goes by things change and this is to become my Granddaughter's little put put tractor.
I started tear down Friday. Gone are the heavy clutch, 26 inch Firestone's, rear weight brackets, wheelie bars, and breakaway kill switch.
The photo shows roughly where I'm at right now with it. But the look can deceive, the frame is in good shape, the steering box is tight, and the rear transaxle is packed with all the good stuff inside and is staying.
DSCN8119.JPG
DSCN8119.JPG (831.76 KiB) Viewed 507 times
I don't know why I'm bedeviled by these things, last Winter I installed one upside down in the snow and mud and Friday I snapped this one. When I saw Joe at Zagray last Saturday and told him about it he gave me one of those what the hell did you do that for looks and I knew straight away he was spot on right :oops:
DSCN8114.JPG
DSCN8114.JPG (1.13 MiB) Viewed 507 times
Anyway, he was nice enough to let me rummage around in the scrap heap where I found another. Disaster averted ;)

With the engine out I can make my decision with which way I'm heading. The engine in the foreground is the puller engine. It has about something like 40 hooks on it. But I'm not using that for what the machine is to become as I'm pretty sure one of the valve tappets is not rotating correctly and it needs to be gone through again. Also there's evidence of rodent tenants at the head. It's way too much engine (and money) for a kid in the first place. Rather, I'm planning on going with the 12Hp replacement engine toward the rear of the photo. It does have a slight puff of smoke at startup but I happen to know it's in good shape inside and that the balance gears are removed. Also the PTO clutch is like new.
DSCN8115.JPG
DSCN8115.JPG (926.71 KiB) Viewed 507 times
Here is the clutch torn down. I'm glad to see that heavy spring go, it's murder on the foot and throwout bearing is roached. New parts are heading my way. The drive shaft has almost no wear but then I did make it out of 718 Inconel.
DSCN8116.JPG
DSCN8116.JPG (1004.16 KiB) Viewed 507 times
And I do have that pesky little clutch pedal yoke back where it belongs not even upside down, I think :roll:
DSCN8122.JPG
DSCN8122.JPG (1.14 MiB) Viewed 507 times
So now it's pretty much a matter of delivery trucks showing up. I'm changing out the wire harness as well. In the meantime it's about cleaning and staging parts for reassembly.

Klapatta
Posts: 1129
Joined: Mon Sep 06, 2010 2:25 pm
First and Last Name: Kenneth LaPatta
Location: Rockingham VT.

Re: The 100 reincarnation

Post by Klapatta »

While I'm waiting on clutch and electrical parts to show up it's time to turn my attention to other things.
The seat pan was in need of paint and I scuffed it with some sand paper and gave it a coat of Rust-Oleum almond spray paint. The starter generator while freshly rebuilt got a quick coat of CaseIH Iron Gard federal yellow. The stock air cleaner is going to be reinstalled. Since a 100 will not accept the larger gas tank I'm putting the smaller one back on. I converted it to the internal filter arrangement, those glass bowls vibrate and are tough on the gas tanks.
DSCN8129.JPG
DSCN8129.JPG (609.11 KiB) Viewed 494 times
The replacement engine is ready to go in. It was given a new head gasket and the gas tank mount bracket has been changed over to the small style.
DSCN8132.JPG
DSCN8132.JPG (924.01 KiB) Viewed 494 times
Here's the deck that will be going on, it's a real nice 42" three piece with a recent rebuild of the spindles. It has new genuine IH blades on it too. I went through all the mule drive pulleys and found the two best ones. They have years of service left in them.
DSCN8131.JPG
DSCN8131.JPG (974.63 KiB) Viewed 494 times
I'm not quite sure about this just yet.
DSCN8134.JPG
DSCN8134.JPG (776.65 KiB) Viewed 494 times
While it ran well when I parked it that may need work, I'm unsure. That said I did disconnect the fuel line and run the machine out of gasoline before covering it up.

Klapatta
Posts: 1129
Joined: Mon Sep 06, 2010 2:25 pm
First and Last Name: Kenneth LaPatta
Location: Rockingham VT.

Re: The 100 reincarnation

Post by Klapatta »

This just showed up in my mail box today.
DSCN8140.JPG
DSCN8140.JPG (875.91 KiB) Viewed 492 times
I still need to remachine the clutch discs.
Damn the torpedo's full steam ahead! :lol:

I got to thinking what am I stepping around all these wheel weights for and how about mounting a pair on the inside of those 25" ATV tires?
DSCN8138.JPG
DSCN8138.JPG (1.06 MiB) Viewed 492 times
With them and the 52 pound Bolens weights on the outside that will make 78 pounds per side.
While I had the wheels off I tossed a brushed on coat of yellow 483B left over from a previous project for the inside of the fenders just to add some extra rust protection, nothing fancy- this is about preserving the metal.
DSCN8139.JPG
DSCN8139.JPG (860.58 KiB) Viewed 492 times
Yes sir that's I'm talkin about ;)

User avatar
dag1450
Posts: 2157
Joined: Fri Apr 01, 2011 3:16 pm
First and Last Name: Dave Gibson
Location: Chalfont, Pa

Re: The 100 reincarnation

Post by dag1450 »

Cool project! Your gonna give the granddaughter a mower? Your gonna ask her to work while she visits..... :roll:
127, 1650, 1572, 1872, 2072 . A mower, blower and blade for each.

Klapatta
Posts: 1129
Joined: Mon Sep 06, 2010 2:25 pm
First and Last Name: Kenneth LaPatta
Location: Rockingham VT.

Re: The 100 reincarnation

Post by Klapatta »

It was a good day. The 100 is now a fully renovated roller with the replacement engine, new clutch, and new wire harness yet to be installed.
DSCN8150.JPG
DSCN8150.JPG (925.55 KiB) Viewed 476 times
This Evening I was able to get the clutch assembly together.
DSCN8151.JPG
DSCN8151.JPG (951.81 KiB) Viewed 476 times
Wife says I ruined 2 pair of blue jeans on this job. :?
Well, the really dirty work is starting to wind down now ;)

Klapatta
Posts: 1129
Joined: Mon Sep 06, 2010 2:25 pm
First and Last Name: Kenneth LaPatta
Location: Rockingham VT.

Re: The 100 reincarnation

Post by Klapatta »

Well, I drove it under the deck 5 years ago and I swore I meant what I said about driving it out of there.
And today I did.
DSCN8162.JPG
DSCN8162.JPG (1.46 MiB) Viewed 461 times
Still need to install the new wire harness, get the lights working, retorque the head, mount the mule drive, deck carriage, deck, and mount the hood.
Hoping to have that stuff out of the way by tomorrow Afternoon.

Klapatta
Posts: 1129
Joined: Mon Sep 06, 2010 2:25 pm
First and Last Name: Kenneth LaPatta
Location: Rockingham VT.

Re: The 100 reincarnation

Post by Klapatta »

99% done. Say amen. :D
DSCN8174.JPG
DSCN8174.JPG (1.33 MiB) Viewed 452 times
DSCN8178.JPG
DSCN8178.JPG (1.36 MiB) Viewed 452 times
Although I still need to relocate the headlight switch and set the toe in. The replacement engine runs very strong.
Rather than modify a brand new wire harness to accept an amp meter I've changed over to a voltage gauge which is much easier to install.
I like it better anyway. ;)
DSCN8184.JPG
DSCN8184.JPG (629.83 KiB) Viewed 452 times
I need the correct headlight switch for another project so the after market replacement is going to be moved over to the volt gauge. The indicator light is going to be wired in to show when they are on.

With spare parts on hand to do the build only the essentials were purchased so the entire project came in at well under $300.
My thanks to Joe Motuzick, Mike LaMar, and CCSpecialists, for all their help :mrgreen:

User avatar
dag1450
Posts: 2157
Joined: Fri Apr 01, 2011 3:16 pm
First and Last Name: Dave Gibson
Location: Chalfont, Pa

Re: The 100 reincarnation

Post by dag1450 »

Man....that was fast! Looks great.
127, 1650, 1572, 1872, 2072 . A mower, blower and blade for each.

Klapatta
Posts: 1129
Joined: Mon Sep 06, 2010 2:25 pm
First and Last Name: Kenneth LaPatta
Location: Rockingham VT.

Re: The 100 reincarnation

Post by Klapatta »

Bye bye little Cubbie, bye bye. :(
33 years, 10 months, and 3 weeks you were with me.
Onto the next generation you go.
DSCN8207.JPG
DSCN8207.JPG (1.43 MiB) Viewed 430 times
If he takes good care of it that thing will still be going long after I'm dead and gone.
The end. :lol:

User avatar
dag1450
Posts: 2157
Joined: Fri Apr 01, 2011 3:16 pm
First and Last Name: Dave Gibson
Location: Chalfont, Pa

Re: The 100 reincarnation

Post by dag1450 »

Hope he has a shed/garage.....or at least a high deck ;)
127, 1650, 1572, 1872, 2072 . A mower, blower and blade for each.

Post Reply