I am in the process of acquiring parts for a clutch change
I am looking into replacing the 3 pin drive plate, the one on the 122 seems to be warped so
I would replace while doing the clutch
So the question are they all the same on a 108 - 122
Or are they different between 10 and 12 hp models?
I am changing on a 122 with a loader (danco)
Three pin drive plate ?
-
- Posts: 99
- Joined: Sun Sep 09, 2012 6:32 am
- First and Last Name: robert lindstadt
- Location: east nporthport, NY
-
- Moderator
- Posts: 1175
- Joined: Tue Sep 07, 2010 6:22 pm
- First and Last Name: Joe Motuzick
- Location: Torrington Ct
Re: Three pin drive plate ?
All the 3 pin drivers 70/100 (1964) through the 8/9 series (1974) arethe same. Should be roughly 500,000 tractors. I should have a few, if you need one PM/email me.
-
- Posts: 99
- Joined: Sun Sep 09, 2012 6:32 am
- First and Last Name: robert lindstadt
- Location: east nporthport, NY
Re: Three pin drive plate ?
I have located a parts tractor closeJMotuzick wrote:All the 3 pin drivers 70/100 (1964) through the 8/9 series (1974) arethe same. Should be roughly 500,000 tractors. I should have a few, if you need one PM/email me.
Just have see how to bring in home
Looks like the parts I need are there
Thanks for your help