147 Drive Shaft Part Identification

Here is where we can talk about all things Cub and then some. Please follow the golden rule and respect others.
This is a free forum and all pictures posted here are for public consumption. They are free to be used as long as you are not using them in a for-profit manner. Also, any pictures subject to copyright or permissions will be removed.
Post Reply
User avatar
erick
Posts: 9
Joined: Wed Nov 29, 2017 9:50 pm
First and Last Name: Erick Feucht
Location: Sandy Hook, CT

147 Drive Shaft Part Identification

Post by erick »

I got a sweet 147 from my father-in-law and I'm trying to get it back in good working order. I found that the coupling attached to the shaft coming out of the hydrostatic transmission is attached to some drive shaft parts that I can't identify. I've been poring over the manuals (owner's and service) and the parts lists on the supply websites but I just cant find the parts. See the attached photos.

I found this because this mass of whirling looseness is hitting the tranny oil filter and popped a leak in it. The bigger problem is that the drive train needs to be fixed properly. I have a feeling I have a big job ahead of me. :)
20190721_145313.jpg
20190721_145313.jpg (2.38 MiB) Viewed 4759 times
20190721_145323.jpg
20190721_145323.jpg (1.9 MiB) Viewed 4759 times
20190721_145330.jpg
20190721_145330.jpg (1.82 MiB) Viewed 4759 times
Screenshot 2019-07-21 15.56.51.png
Screenshot 2019-07-21 15.56.51.png (1.47 MiB) Viewed 4759 times
Erick

User avatar
chzuck
Posts: 362
Joined: Tue Sep 07, 2010 2:51 pm
First and Last Name: Charlie Zuck
Location: Elizabethtown, PA

Re: 147 Drive Shaft Part Identification

Post by chzuck »

I believe you need the driveshaft, which is item #1 on the attached parts list. Looks like your fan has lost all of its blades.
Drive Shaft.pdf
(163.39 KiB) Downloaded 228 times
http://www.zucksrototillers.com
There is only ONE ROTOTILLER.
147 with 48" mower deck & 42" QA snow thrower
70 with 42" mower deck, 42" blade, & Brinly 10" plow

Klapatta
Posts: 1352
Joined: Mon Sep 06, 2010 2:25 pm
First and Last Name: Kenneth LaPatta
Location: Rockingham VT.

Re: 147 Drive Shaft Part Identification

Post by Klapatta »

$110.30 is way too pricy for that shaft. Have you considered contacting Forum member Jeff in PA?
drive shaft.png
drive shaft.png (296.07 KiB) Viewed 4750 times
He makes and sells them for a fraction of that cost and uses 4140 steel doing it.
CC Specialists has them as well for only a few dollars more along with anything else needed thus making for a one stop shopping trip, both make their own (or source them out) and pass the savings on to you 8-)

User avatar
Jeff in Pa
Posts: 665
Joined: Sun Sep 12, 2010 8:06 am
First and Last Name: Jeff Derstine
Location: Zionsville,PA

Re: 147 Drive Shaft Part Identification

Post by Jeff in Pa »

I can make a new driveshaft for you. Also check the rear pump coupler for excessive wear where the 3/8" driveshaft diameter fits in. At the engine, check to see if the drive hub is still in good shape. Once the driveshaft starts wobbling, it wears the slots.

It would be more cost effective to replace the worn parts at one time. If you need multiple parts, I can make a package deal for you

Jeff
125 & 125 with hydraulic lift

User avatar
chzuck
Posts: 362
Joined: Tue Sep 07, 2010 2:51 pm
First and Last Name: Charlie Zuck
Location: Elizabethtown, PA

Re: 147 Drive Shaft Part Identification

Post by chzuck »

I changed the front coupler setup on my 147 to the type used on the later quiet line. Much better setup!
http://www.zucksrototillers.com
There is only ONE ROTOTILLER.
147 with 48" mower deck & 42" QA snow thrower
70 with 42" mower deck, 42" blade, & Brinly 10" plow

User avatar
cholloway
Posts: 115
Joined: Thu Sep 09, 2010 12:08 am
First and Last Name: Colin Holloway
Location: Covington, Georgia

Re: 147 Drive Shaft Part Identification

Post by cholloway »

What I'm seeing is a well-worn rag joint.
Official Member SCCG

DaveKamp
Posts: 555
Joined: Mon Sep 06, 2010 10:19 am
First and Last Name: Dave Kamp
Location: LeClaire, Ia

Re: 147 Drive Shaft Part Identification

Post by DaveKamp »

That is why they're called 'rag joints'... :roll:

Okay, so, the rag joint not only transmits torque, it allows compliance in both radial and longitudinal directions.

Radial meaning, the centerline of the driveshaft is not necessarily in-line with the plane of the driven end... a common cardan-type 'u-joint' does this.

The longitudinal compliance, is what you get when the frame flexes such that the shaft needs to move closer or farther from the driven end. A common U-joint will NOT allow this, unless it's in a slip yoke.

The rag joint has some advantages... first, it takes up very little space, second, it's very simple... third, it demands NO lubrication, and finally, it isolates... both vibration, and electricity.

The first is nice for things that involve human hands... no vibration is a really nice thing... and the second... It is not unusual for a bad ground to wind up making a driveline component the 'current flow path' for things like starter, or charging current... which ruins bearings, U-joints, gears, and hydrostat pumps.

Rag joints are most commonly found in steering columns of automobiles and light trucks. They can be used in engine couplings, but as you see here, they tend to take a beating.
Yes, I'm a Mad Scientist... but I'm usually happy, even when things ain't goin right.

DaveKamp
Posts: 555
Joined: Mon Sep 06, 2010 10:19 am
First and Last Name: Dave Kamp
Location: LeClaire, Ia

Re: 147 Drive Shaft Part Identification

Post by DaveKamp »

If you want a more serious driveline:

download/file.php?id=17034

And... don't worry about the fan. I work the p!$$ out of Loader-Mutt, with a 24hp Honda, and the Hy-Tran warms up, but I've beat it relentlessly for 24 years... and I still haven't cooked the hydrostat unit.

And I mean... relentlessly...
Yes, I'm a Mad Scientist... but I'm usually happy, even when things ain't goin right.

Post Reply