125 hydro problem
-
- Posts: 10
- Joined: Sun Jan 14, 2018 7:22 pm
- First and Last Name: Craig Hardie
- Location: Wyoming NY
125 hydro problem
To make a long story short I combined 2 tractors to make one. Both were driving and fully functioning. One had a bad frame and good engine but the hydro leaked bad. The other had bad engine but good frame and clean leak free hydro. Other than the engine swap the only thing I changed was the shaft that goes up to the direction handle on the dashboard. Someone had welded a chunk of steel on the old one. The new combined tractor runs great and drives forward fine. Reverse seems to have disappeared. The linkage is moving as it should. Can anyone give any suggestions?
-
- Posts: 168
- Joined: Sun Oct 10, 2010 9:04 am
- First and Last Name: Dale Campbell
- Location: Summerville, PA
Re: 125 hydro problem
button on top of release valve stuck down .
-
- Posts: 10
- Joined: Sun Jan 14, 2018 7:22 pm
- First and Last Name: Craig Hardie
- Location: Wyoming NY
Re: 125 hydro problem
Thank you I will check that. Seems odd this could be the case because it drives forward with no issue
-
- Posts: 168
- Joined: Sun Oct 10, 2010 9:04 am
- First and Last Name: Dale Campbell
- Location: Summerville, PA
Re: 125 hydro problem
1 valve is forward .1 is reverse