Mower deck belt

Here is where we can talk about all things Cub and then some. Please follow the golden rule and respect others.
This is a free forum and all pictures posted here are for public consumption. They are free to be used as long as you are not using them in a for-profit manner. Also, any pictures subject to copyright or permissions will be removed.
Post Reply
swampfox
Posts: 8
Joined: Thu Jul 17, 2014 6:02 pm
First and Last Name: James Beers
Location: Danbury, CT

Mower deck belt

Post by swampfox »

Looking for the mower deck belt size ,deck is on a CC73.

swampfox
Posts: 8
Joined: Thu Jul 17, 2014 6:02 pm
First and Last Name: James Beers
Location: Danbury, CT

Re: Mower deck belt

Post by swampfox »

It is a 38 inch deck.

JMotuzick
Moderator
Posts: 1172
Joined: Tue Sep 07, 2010 6:22 pm
First and Last Name: Joe Motuzick
Location: Torrington Ct

Re: Mower deck belt

Post by JMotuzick »

Looks like
754-3002 is the deck belt 1/2-72 is the common size.

490489r2 is the engine to deck A-79 is the common size.

Hope this helps

Klapatta
Posts: 1352
Joined: Mon Sep 06, 2010 2:25 pm
First and Last Name: Kenneth LaPatta
Location: Rockingham VT.

Re: Mower deck belt

Post by Klapatta »

Here is the chart
DSCN8918.JPG
DSCN8918.JPG (856 KiB) Viewed 3309 times
Type A belt will work just fine for the spindles. However for the PTO to deck belt I prefer the genuine article.
It has a much thicker cross section than a type A belt making it far less likely to invert when twisting around the idler pulleys.
DSCN0945.JPG
DSCN0945.JPG (110.87 KiB) Viewed 3309 times

swampfox
Posts: 8
Joined: Thu Jul 17, 2014 6:02 pm
First and Last Name: James Beers
Location: Danbury, CT

Re: Mower deck belt

Post by swampfox »

I would like to thank everyone for there help.The 72 in. belt worked fine until something happened to one of the pulleys,I suspect the idler or maybe rust scale on the main pulley.The belt self destructed.

Post Reply