2082 belts

Here is where we can talk about all things Cub and then some. Please follow the golden rule and respect others.
This is a free forum and all pictures posted here are for public consumption. They are free to be used as long as you are not using them in a for-profit manner. Also, any pictures subject to copyright or permissions will be removed.
Post Reply
User avatar
TractorDan
Posts: 79
Joined: Tue Sep 27, 2011 8:02 pm
First and Last Name: Dan Cocsorso
Location: Central, IL

2082 belts

Post by TractorDan »

Anyone know the napa part numbers for the two deck belts for a 2082 with 60" deck?
383 w/deck & snowplow
2072 w/loader
2082 w/deck & plow & blower
1772 w/deck
128 w/deck
1949 Cub w/deck, plow, & snowplow
M-48 Tank w/deck & Snowplow
Mowett Mustang 5hp
71 w/deck

User avatar
SWilliams
Posts: 805
Joined: Mon Sep 06, 2010 7:14 pm
First and Last Name: Steve Williams
Location: Fort Plain NY (Upstate NY near Cooperstown)

Re: 2082 belts

Post by SWilliams »

There are a couple belts depending on the serial number of the tractor. They are different due to the size of the front clutch and that there are 2 different 60" decks.
For the tractors up to serial number 821,059 with the 374 60" deck -
The clutch to deck belt is an MTD 954-3023, 5/8" X 94" Kevlar reinforced. The generic number would be a B91K or 5L940K
The deck belt is an MTD 954-3052, 5/8" X 114" Kevlar reinforced. The generic numbers are B111K or 5L114K

For the 2082 serial number 821,060 up with the 325 60" deck -
The clutch to deck belt is an MTD 954-3051A, 5/8" X 97.5" Kevlar reinforced. The generic number would be a B94K or 5L970K, This is 1/2" shorter than the OE belt but will work just fine.
The deck belt is an MTD 954-3052, 5/8" X 114" Kevlar reinforced. The generic numbers are B111K or 5L114K
Owner of an 1863, 2263 (1863 W 22hp engine!) 2084 and a 2 - 2284s.


"In God we trust, All others pay CASH..."

User avatar
TractorDan
Posts: 79
Joined: Tue Sep 27, 2011 8:02 pm
First and Last Name: Dan Cocsorso
Location: Central, IL

Re: 2082 belts

Post by TractorDan »

:beer: thank you
383 w/deck & snowplow
2072 w/loader
2082 w/deck & plow & blower
1772 w/deck
128 w/deck
1949 Cub w/deck, plow, & snowplow
M-48 Tank w/deck & Snowplow
Mowett Mustang 5hp
71 w/deck

User avatar
TractorDan
Posts: 79
Joined: Tue Sep 27, 2011 8:02 pm
First and Last Name: Dan Cocsorso
Location: Central, IL

Re: 2082 belts

Post by TractorDan »

Well, I have a mixed match setup...which could be why I can't locate belts size.
What would you recommend if my tractors serial number is 826243 and deck is a 374190. All mounted on 2082
383 w/deck & snowplow
2072 w/loader
2082 w/deck & plow & blower
1772 w/deck
128 w/deck
1949 Cub w/deck, plow, & snowplow
M-48 Tank w/deck & Snowplow
Mowett Mustang 5hp
71 w/deck

User avatar
SWilliams
Posts: 805
Joined: Mon Sep 06, 2010 7:14 pm
First and Last Name: Steve Williams
Location: Fort Plain NY (Upstate NY near Cooperstown)

Re: 2082 belts

Post by SWilliams »

Well the main deck belt is the same, for the drive belt it will depend on the actual clutch on the tractor and what the center pulley size on the deck are. Those were the items that changed. The catch is that both were called out as parts that could be changed depending on which way they were being used. So say you already had one of the early tractors with a blower, and mower and bought the newer tractor, you could opt to change the clutch on the tractor over to the smaller one to match the two attachments you have. Or if you were buying the older deck but putting it on the newer tractor you could change out the center pulley to match the newer clutch size.

The clutch difference is that the early tractors ran a 917-3043 clutch with a 5 " clutch pulley, While the later tractors like yours came with a 917-3340 6" clutch pulley. So if yours measures 6" it has the original clutch. That means it should also use the 451 snow blower.

The deck pulleys are different because of the same reason. They used a HA 14241 pulley on the earlier decks that was smaller than the 756-3057 pulley on the 325 deck and it has a 6.5" upper pulley. Yours in stock mode should have smaller pulley, if it has the 6.5" upper it was changed.

So if the tractor has the original 6" clutch and the deck has the updated 6.5" pulley you would use the 5L940K belt.
If the deck has the smaller 5.5" pulley but the tractor clutch was also changed to the 5" you would use the 5L970K belt.

However if you have the tractor with the 6" clutch and the deck has the earlier 5.5" small pulley, that wasn't an OE type combination as they wanted to keep the blade speed down, As such the belt would be shorter but given the tensioners on the mule drive the 94" belt may work, but likely a 95" would be better.
Owner of an 1863, 2263 (1863 W 22hp engine!) 2084 and a 2 - 2284s.


"In God we trust, All others pay CASH..."

User avatar
TractorDan
Posts: 79
Joined: Tue Sep 27, 2011 8:02 pm
First and Last Name: Dan Cocsorso
Location: Central, IL

Re: 2082 belts

Post by TractorDan »

A wealth of knowledge. You are correct, the tractor runs the 451 blower. Thank you again for your time in explaining the pulley size difference with my setup.
383 w/deck & snowplow
2072 w/loader
2082 w/deck & plow & blower
1772 w/deck
128 w/deck
1949 Cub w/deck, plow, & snowplow
M-48 Tank w/deck & Snowplow
Mowett Mustang 5hp
71 w/deck

Post Reply