Cadet 60 blade manual

Here is where we can talk about all things Cub and then some. Please follow the golden rule and respect others.
This is a free forum and all pictures posted here are for public consumption. They are free to be used as long as you are not using them in a for-profit manner. Also, any pictures subject to copyright or permissions will be removed.
Post Reply
User avatar
ksanders
Posts: 930
Joined: Mon Sep 06, 2010 2:56 pm
First and Last Name: Kevin Sanders
Location: Sellersburg, Indiana

Cadet 60 blade manual

Post by ksanders »

Does anyone have a manual or link to one for the Cadet 60 rer model 10 blade? I was fortunate enough to get one but hooking it up isn't painfully obvious. It's only missing the lift rods and one small bracket. It isn't in the downloads.
From the first Original to the last x82 Series... you can't beat an IH Cub Cadet!!!

User avatar
l palma
Posts: 738
Joined: Mon Sep 06, 2010 9:46 am
First and Last Name: Lew Palma
Location: Montague, N.J.

Re: Cadet 60 blade manual

Post by l palma »

Kevin,

This is from the cub cadet parts site. it is under Cub Cadet International Harvester Rear Engine Riders, International 10 Blade-36"-Built 1968-1973, International 10 Blade
Attachments
Medium.png
Medium.png (75.07 KiB) Viewed 1627 times

User avatar
ksanders
Posts: 930
Joined: Mon Sep 06, 2010 2:56 pm
First and Last Name: Kevin Sanders
Location: Sellersburg, Indiana

Re: Cadet 60 blade manual

Post by ksanders »

Thanks Lew! A member sent me pictures of his manual. It isn't a print off or original in hand but certainly got me where I need to be and one attachment you really need the info from the manual. I'm currently machining both of us some of the brackets (parts 4 and 5) on the cnc mill at work. I'd searched and never found the picture you sent. I feel like looking that stuff up on partstree and such was much simpler 10 years ago but maybe it's just me. Thanks again. One day soon hope to have some pictures of it all together. Not many pictures out there in general.
From the first Original to the last x82 Series... you can't beat an IH Cub Cadet!!!

User avatar
ksanders
Posts: 930
Joined: Mon Sep 06, 2010 2:56 pm
First and Last Name: Kevin Sanders
Location: Sellersburg, Indiana

Re: Cadet 60 blade manual

Post by ksanders »

Almost there. Used the brackets I made for the frame and turned down a quick bushing to locate the holes in the fiberglass. I'd make a couple minor mods if I made more but everything went together great. I'm half done with the lift rods and have to get those right and I'll be done.

Almost ready to move some serious dirt as I know it will!!! Might just have to buy some ags and rib tires just for the heck of it.
Attachments
IMG_20210815_1704052.jpg
IMG_20210815_1704052.jpg (4.71 MiB) Viewed 1583 times
IMG_20210815_1200592.jpg
IMG_20210815_1200592.jpg (205.16 KiB) Viewed 1583 times
IMG_20210813_123619.jpg
IMG_20210813_123619.jpg (2.26 MiB) Viewed 1583 times
From the first Original to the last x82 Series... you can't beat an IH Cub Cadet!!!

User avatar
Tom Scott
Chief Moderator
Posts: 1763
Joined: Mon Sep 06, 2010 9:11 pm
First and Last Name: Tom Scott
Location: Bentley Springs, Maryland

Re: Cadet 60 blade manual

Post by Tom Scott »

Kevin - I can't figure out why, but something about those bathtubs is entertaining to me, thanks for sharing! Strangely appealing, even though they're light duty machines. Maybe it's the simplicity and the "go cart" look that makes you remember being a kid! I can't imagine they could push much snow, but I guess for the right place with a flat drive and light snows they got the job done. Any way, cool project!
:beer:
1872, 46", 50C decks, Haban dozer blade, 450 snow blower
2182-1, Kwik-Way Loader, 3-pt & rear pto, 442 tiller
2182-2, 54" deck, 551 snow blower
Past tractors:  1541, 2135
<><

Post Reply