Pin on snow blade on a QA tractor
- BigMike
- Posts: 1359
- Joined: Mon Sep 06, 2010 8:45 pm
- First and Last Name: Mike Andrews
- Location: Niles,Michigan
Pin on snow blade on a QA tractor
I sold my 126 with a pin on blade that had extensions. The buyer is saying it won’t fit. I have not messed with one of these for a long time, can someone take a stab at what could be the issue?
-
- Posts: 1363
- Joined: Mon Sep 06, 2010 2:25 pm
- First and Last Name: Kenneth LaPatta
- Location: Rockingham VT.
Re: Pin on snow blade on a QA tractor
Wrong sub frame? If memory serves me it is supposed to look like this.
Of course if it went on before it should go on again-- BigMike
- Posts: 1359
- Joined: Mon Sep 06, 2010 8:45 pm
- First and Last Name: Mike Andrews
- Location: Niles,Michigan
Re: Pin on snow blade on a QA tractor
Ken, that is the correct blade. But I was under the impression that you could bolt on an earlier non-QA blade. Is that wrong?
-
- Moderator
- Posts: 1175
- Joined: Tue Sep 07, 2010 6:22 pm
- First and Last Name: Joe Motuzick
- Location: Torrington Ct
Re: Pin on snow blade on a QA tractor
Mike
I tried once, it wasn’t working, the bolts for the extension hit the qa mechanism on the frame. I gave up and found the right sub-frame.
I tried once, it wasn’t working, the bolts for the extension hit the qa mechanism on the frame. I gave up and found the right sub-frame.
- BigMike
- Posts: 1359
- Joined: Mon Sep 06, 2010 8:45 pm
- First and Last Name: Mike Andrews
- Location: Niles,Michigan
Re: Pin on snow blade on a QA tractor
Thanks guys. I’ll have to figure out a fix for the guy.
- dag1450
- Posts: 2375
- Joined: Fri Apr 01, 2011 3:16 pm
- First and Last Name: Dave Gibson
- Location: Chalfont, Pa
Re: Pin on snow blade on a QA tractor
I wonder if he's saying the blade won't fit on the undercarriage? Tell him he needs a big pry bar to get the "ears" or studs into the undercarriage holes. I have wrestled with that before. Tell him he needs to be a man about it!! Tell him.. let's go Brandon about it!
127, 1650, 1572, 1872, 2072 . A mower, blower and blade for each.
- BigMike
- Posts: 1359
- Joined: Mon Sep 06, 2010 8:45 pm
- First and Last Name: Mike Andrews
- Location: Niles,Michigan
Re: Pin on snow blade on a QA tractor
The sub frame is on, it was that way when I pulled it out of the shed.
I know what I would do.....steel, torch, welder....adapter, it fits now but it's an hour away now.
I know what I would do.....steel, torch, welder....adapter, it fits now but it's an hour away now.
-
- Posts: 1363
- Joined: Mon Sep 06, 2010 2:25 pm
- First and Last Name: Kenneth LaPatta
- Location: Rockingham VT.
Re: Pin on snow blade on a QA tractor
I have a second one of those someplace in the big pile. Probably near the bottom no doubt-
Anyway somebody hack sawed the pins off, I'd think that it would be fixable easy enough.
Why would someone do that?
Anyway somebody hack sawed the pins off, I'd think that it would be fixable easy enough.
Why would someone do that?