Paint pics......

This is just like the old coffee shop, which was like the old coffee shop down the street. Pull up a chair, sit down and enjoy some good discussions. Please, no political, religious or racial posts.

Paint pics......

Postby dag1450 » Sat Jul 07, 2018 8:22 pm

I put the paint booth back up! :)
I was gonna buy an ez up thing and make it into a small booth..... but after thinking and pricing....I just decided to put mine up. I have various projects on for this summer... Up now is some super tin.
I had this paint on hand and is about 4 years old....and needed lots or thinner. I should have put more but I was getting nervous about how much I already put in. The orange peel is from being on the thicker side..... :cry: not to bad....but I'm a little disappointed....oh well. Live and learn
IMG_20180707_090342195.jpg
IMG_20180707_112554685.jpg
IMG_20180707_112623059.jpg
IMG_20180707_112603080.jpg
You do not have the required permissions to view the files attached to this post.
127, 1650, 1572, 1872, 2072 x 2 . A mower, blower and blade for each.
User avatar
dag1450
 
Posts: 1964
Images: 12
Joined: Fri Apr 01, 2011 3:16 pm
City and State: Chalfont, Pa
First and Last Name: Dave Gibson

Re: Paint pics......

Postby dag1450 » Sun Jul 08, 2018 8:00 pm

Ok...so as it dried the final finish got a little smoother. So I'm happy now. :P
Did a little assembly today..... very little. I thought I took a picture of the installed headlights? Oh well... trust me..
IMG_20180708_135403723.jpg
:o
You do not have the required permissions to view the files attached to this post.
127, 1650, 1572, 1872, 2072 x 2 . A mower, blower and blade for each.
User avatar
dag1450
 
Posts: 1964
Images: 12
Joined: Fri Apr 01, 2011 3:16 pm
City and State: Chalfont, Pa
First and Last Name: Dave Gibson

Re: Paint pics......

Postby dag1450 » Fri Aug 17, 2018 7:20 pm

Next metal into the booth is 1650. It's taken longer than expected as always. Did some last minute welds tonight. The hydraulic handle had some cracking going on.....hard to believe...idk. I was thinking I was going to weld from the front then grind it down flush....then it dawned on me...weld the back dummy....lol
IMG_20180817_191620467.jpg
IMG_20180817_185839659.jpg
IMG_20180817_185949014.jpg
You do not have the required permissions to view the files attached to this post.
127, 1650, 1572, 1872, 2072 x 2 . A mower, blower and blade for each.
User avatar
dag1450
 
Posts: 1964
Images: 12
Joined: Fri Apr 01, 2011 3:16 pm
City and State: Chalfont, Pa
First and Last Name: Dave Gibson

Re: Paint pics......

Postby dag1450 » Sat Aug 18, 2018 7:00 pm

I guess the heat caught me off guard.....primer was drying too fast so I got some good over spray "stubble". Well....I was going to sand this coat anyway so not big deal....I just hope I don't need to redo primer.
IMG_20180818_173658733.jpg
IMG_20180818_173633327.jpg
You do not have the required permissions to view the files attached to this post.
127, 1650, 1572, 1872, 2072 x 2 . A mower, blower and blade for each.
User avatar
dag1450
 
Posts: 1964
Images: 12
Joined: Fri Apr 01, 2011 3:16 pm
City and State: Chalfont, Pa
First and Last Name: Dave Gibson

Re: Paint pics......

Postby JMotuzick » Sat Aug 18, 2018 8:41 pm

Hope you have a dehumidifier running in your shop? To wet around here to paint!
JMotuzick
Moderator
 
Posts: 885
Joined: Tue Sep 07, 2010 6:22 pm
City and State: Torrington Ct
First and Last Name: Joe Motuzick

Re: Paint pics......

Postby Oak » Sun Aug 19, 2018 7:33 am

Looking great Dag. I'm liking your booth too. Now lets see the final results.
Oak
 
Posts: 123
Joined: Thu Nov 25, 2010 7:40 pm
City and State: Ball Ground, Georgia
First and Last Name: Todd O'Connor

Re: Paint pics......

Postby dag1450 » Sun Aug 19, 2018 1:48 pm

Joe..Yesterday was warm and kinda muggy but not too bad.... for primer...lol. I should have used a different reducer and it would have been better. Today I quickly wet sanded everything....in the rain and hung back up. I used HOT water for my rinse as this helped quick drying. I did sand through in a couple spots....but not much. The Rust-Oleum top coat is very forgiving.
Todd.... the booth is so sweet. I'm near horses.... and is really a must with the flys. If u read up top....I didn't want to set this one up....but so glad I did. If u click on the hood pic....u can see the primer dust I had to sand off.
IMG_20180819_105244050.jpg
IMG_20180819_105422562.jpg
You do not have the required permissions to view the files attached to this post.
127, 1650, 1572, 1872, 2072 x 2 . A mower, blower and blade for each.
User avatar
dag1450
 
Posts: 1964
Images: 12
Joined: Fri Apr 01, 2011 3:16 pm
City and State: Chalfont, Pa
First and Last Name: Dave Gibson

Re: Paint pics......

Postby dag1450 » Sun Aug 26, 2018 2:14 pm

Got some me time today. Painting went well. Little disappointed with 2 imperfections (fisheyes).....but I need to tell myself.... IT'S A TRACTOR :lol:
IMG_20180826_124956574.jpg
IMG_20180826_125032255.jpg
IMG_20180826_125105453.jpg
You do not have the required permissions to view the files attached to this post.
127, 1650, 1572, 1872, 2072 x 2 . A mower, blower and blade for each.
User avatar
dag1450
 
Posts: 1964
Images: 12
Joined: Fri Apr 01, 2011 3:16 pm
City and State: Chalfont, Pa
First and Last Name: Dave Gibson

Re: Paint pics......

Postby dag1450 » Mon Aug 27, 2018 7:23 pm

Trying to get all the white done while it's out on the bench......so I'm moving on to the rims. I forgotten how horrible rims are to sand. Some of the deep chips I will putty. Back will get blasted at the joint. Had some help this evening....till the misqitos chased us in. Brutal this year
IMG_20180827_193737467.jpg
IMG_20180827_193705279.jpg
You do not have the required permissions to view the files attached to this post.
127, 1650, 1572, 1872, 2072 x 2 . A mower, blower and blade for each.
User avatar
dag1450
 
Posts: 1964
Images: 12
Joined: Fri Apr 01, 2011 3:16 pm
City and State: Chalfont, Pa
First and Last Name: Dave Gibson

Re: Paint pics......

Postby JMotuzick » Tue Aug 28, 2018 8:52 am

Not dismounting the tires? That’s cheating!
JMotuzick
Moderator
 
Posts: 885
Joined: Tue Sep 07, 2010 6:22 pm
City and State: Torrington Ct
First and Last Name: Joe Motuzick

Re: Paint pics......

Postby dag1450 » Tue Aug 28, 2018 8:09 pm

:lol: Joe......the only way I get things done is by cheating! My whole life is one big cheat. The tires are original and if I tried to dismount.....they would come off in small pieces. Good thing they have tubes in. :beer:
127, 1650, 1572, 1872, 2072 x 2 . A mower, blower and blade for each.
User avatar
dag1450
 
Posts: 1964
Images: 12
Joined: Fri Apr 01, 2011 3:16 pm
City and State: Chalfont, Pa
First and Last Name: Dave Gibson

Re: Paint pics......

Postby dag1450 » Thu Aug 30, 2018 8:06 pm

I used the small sandblaster to get into the nooks and crannies....then quickly did some wet sanding. Just hitting the bad spots mostly.
IMG_20180830_185620548.jpg
IMG_20180830_190726806.jpg
You do not have the required permissions to view the files attached to this post.
127, 1650, 1572, 1872, 2072 x 2 . A mower, blower and blade for each.
User avatar
dag1450
 
Posts: 1964
Images: 12
Joined: Fri Apr 01, 2011 3:16 pm
City and State: Chalfont, Pa
First and Last Name: Dave Gibson

Re: Paint pics......

Postby dag1450 » Sat Sep 01, 2018 7:06 pm

Ok Joe! I did all this just cause you called me out.
Actually I had one all masked up... almost..and noticed the valve stem was cracked. SON OF A BLEEP! So...I just dismounted. I really think these are factory original tires from 77. I don't know when they switched over to this style? Hope to paint tomorrow.
IMG_20180901_140941286.jpg
IMG_20180901_170502486.jpg
IMG_20180901_170512283.jpg
You do not have the required permissions to view the files attached to this post.
127, 1650, 1572, 1872, 2072 x 2 . A mower, blower and blade for each.
User avatar
dag1450
 
Posts: 1964
Images: 12
Joined: Fri Apr 01, 2011 3:16 pm
City and State: Chalfont, Pa
First and Last Name: Dave Gibson

Re: Paint pics......

Postby Tom Scott » Sat Sep 01, 2018 11:38 pm

Looking good dag! I wish dag lived close to me; he loves painting so much I could get him to paint all my stuff for free! :lol:
2135, (at parent's)
1872, 46", 50C decks, Haban dozer blade, 450 snow blower
2182-1, Kwik-Way Loader, 3-pt & rear pto, 442 tiller
2182-2, 54" deck, 551 snow blower
<><
User avatar
Tom Scott
Moderator
 
Posts: 1469
Images: 16
Joined: Mon Sep 06, 2010 9:11 pm
City and State: Bentley Springs, Maryland
First and Last Name: Tom Scott

Re: Paint pics......

Postby dag1450 » Mon Sep 03, 2018 10:22 am

You kidding me....if I lived close to you I would move! :x
Painted rims this morning. It sure was hot....but wasn't about to wait as they were all ready. Turned out nicer than I expected. These rims from 1977 sure are crude, I can almost see every bend or brake line to make them round. I never saw that before...idk. I was little upset that I mixed up about half gun too much. I knew I was going heavy because I didn't want to run out....oh well. I was thinking real fast what else I could paint white....like snowblower parts..or..super parts......but nothing else was cleaned up and ready.
IMG_20180903_110021492.jpg
IMG_20180903_105953479.jpg
IMG_20180903_105939539.jpg
You do not have the required permissions to view the files attached to this post.
127, 1650, 1572, 1872, 2072 x 2 . A mower, blower and blade for each.
User avatar
dag1450
 
Posts: 1964
Images: 12
Joined: Fri Apr 01, 2011 3:16 pm
City and State: Chalfont, Pa
First and Last Name: Dave Gibson

Re: Paint pics......

Postby dag1450 » Sun Sep 09, 2018 12:34 pm

Mounted tires. Next is to move on to the yellow prep.
IMG_20180909_122017758.jpg
IMG_20180909_125252805.jpg
You do not have the required permissions to view the files attached to this post.
127, 1650, 1572, 1872, 2072 x 2 . A mower, blower and blade for each.
User avatar
dag1450
 
Posts: 1964
Images: 12
Joined: Fri Apr 01, 2011 3:16 pm
City and State: Chalfont, Pa
First and Last Name: Dave Gibson

Re: Paint pics......

Postby dag1450 » Mon Sep 10, 2018 7:52 pm

I get side tracked very easy...and it's raining outside for the last week it seems.
The hour meter on the 1650 was unreadable! REALLY! I could not tell what was up or down. The lens was very "yellow" and fogged. So.... In about 1 hr and some house hold supplies....it looks close to new. Probably about 1/2 hr to remove lens. Then...Wash. Dremel with toothpaste couple times. Then Dremel with cleaner wax. Wash and reinstall.
Is it against the law to turn back the clock :oops:
IMG_20180910_185000286.jpg
IMG_20180910_202109781.jpg
IMG_20180910_203259415.jpg
You do not have the required permissions to view the files attached to this post.
127, 1650, 1572, 1872, 2072 x 2 . A mower, blower and blade for each.
User avatar
dag1450
 
Posts: 1964
Images: 12
Joined: Fri Apr 01, 2011 3:16 pm
City and State: Chalfont, Pa
First and Last Name: Dave Gibson

Re: Paint pics......

Postby dag1450 » Wed Sep 12, 2018 6:52 pm

IMG_20180912_191158101.jpg
IMG_20180912_194225705.jpg
IMG_20180912_194502057.jpg
You do not have the required permissions to view the files attached to this post.
127, 1650, 1572, 1872, 2072 x 2 . A mower, blower and blade for each.
User avatar
dag1450
 
Posts: 1964
Images: 12
Joined: Fri Apr 01, 2011 3:16 pm
City and State: Chalfont, Pa
First and Last Name: Dave Gibson

Re: Paint pics......

Postby ExDodge » Wed Sep 12, 2018 7:10 pm

That looks great dag!
User avatar
ExDodge
 
Posts: 19
Joined: Sat Mar 22, 2014 7:41 pm
City and State: Warminster, PA
First and Last Name: Daniel Gibson

Re: Paint pics......

Postby dag1450 » Sun Sep 30, 2018 7:43 pm

Moved the frame into the booth. I decided to take off the front axle....much easier to paint without it mounted. And It needed a better cleaning around all the greaseable spots. I will dip them in the parts washer and should come up spotless.
IMG_20180928_160335086.jpg
IMG_20180930_181646384.jpg
You do not have the required permissions to view the files attached to this post.
127, 1650, 1572, 1872, 2072 x 2 . A mower, blower and blade for each.
User avatar
dag1450
 
Posts: 1964
Images: 12
Joined: Fri Apr 01, 2011 3:16 pm
City and State: Chalfont, Pa
First and Last Name: Dave Gibson

Re: Paint pics......

Postby dag1450 » Thu Oct 11, 2018 8:13 pm

Nothing like a rainy afternoon to play with some mud. Rear fenders are in pretty good shape.....but just needed that extra touch with some plastic to make them nice. The rear by the left taillight needs the most. I did a lot with a hammer...then skimmed with filler and glazing puddy.
IMG_20181011_191836448.jpg
IMG_20181011_195938429.jpg
IMG_20181011_210020967.jpg
IMG_20181011_210013796.jpg
You do not have the required permissions to view the files attached to this post.
127, 1650, 1572, 1872, 2072 x 2 . A mower, blower and blade for each.
User avatar
dag1450
 
Posts: 1964
Images: 12
Joined: Fri Apr 01, 2011 3:16 pm
City and State: Chalfont, Pa
First and Last Name: Dave Gibson

Re: Paint pics......

Postby dag1450 » Sat Oct 13, 2018 5:17 pm

Pretty happy. I had to b very careful to not lose the factory ridge under the taillight. When I started it really wasn't there but with all the sheet metal bending and Bondo....I'm glad was able to reconstruct it.
IMG_20181013_172709601.jpg
You do not have the required permissions to view the files attached to this post.
127, 1650, 1572, 1872, 2072 x 2 . A mower, blower and blade for each.
User avatar
dag1450
 
Posts: 1964
Images: 12
Joined: Fri Apr 01, 2011 3:16 pm
City and State: Chalfont, Pa
First and Last Name: Dave Gibson

Re: Paint pics......

Postby dag1450 » Sat Oct 13, 2018 8:20 pm

I didn't want to sand and prep the frame in the paint booth....so we carried it to the other garage and put it on horses. Much better working at that level. I got it sanded and was able to remove the drive rivits that holds the id tag.
IMG_20181013_192812007.jpg
You do not have the required permissions to view the files attached to this post.
127, 1650, 1572, 1872, 2072 x 2 . A mower, blower and blade for each.
User avatar
dag1450
 
Posts: 1964
Images: 12
Joined: Fri Apr 01, 2011 3:16 pm
City and State: Chalfont, Pa
First and Last Name: Dave Gibson

Re: Paint pics......

Postby dag1450 » Mon Oct 15, 2018 8:06 pm

Got the frame all prepped.... steering column painted black and front axle ready. I put all the steering linkage together....that way the castle nuts can get painted like factory. It was neat to figure out how it was painted in the factory. Everything was installed on the front axle....but painted separate from the frame. Only reason I'm not doing that is I want to generosity apply grease to the steering components
IMG_20181015_201417494.jpg
IMG_20181015_201615209.jpg
You do not have the required permissions to view the files attached to this post.
127, 1650, 1572, 1872, 2072 x 2 . A mower, blower and blade for each.
User avatar
dag1450
 
Posts: 1964
Images: 12
Joined: Fri Apr 01, 2011 3:16 pm
City and State: Chalfont, Pa
First and Last Name: Dave Gibson

Re: Paint pics......

Postby dag1450 » Wed Oct 17, 2018 7:20 pm

IMG_20181016_152955895.jpg
IMG_20181016_152940032.jpg
You do not have the required permissions to view the files attached to this post.
127, 1650, 1572, 1872, 2072 x 2 . A mower, blower and blade for each.
User avatar
dag1450
 
Posts: 1964
Images: 12
Joined: Fri Apr 01, 2011 3:16 pm
City and State: Chalfont, Pa
First and Last Name: Dave Gibson

Re: Paint pics......

Postby Klapatta » Thu Oct 18, 2018 10:06 am

Looking good Dave. Real good. :beer:
I did a little painting myself this Morning-
DSCN8191.JPG

Funny that the camera took the tint as a bit light, that is Case/IH Federal yellow :?
There's two things left to do on my 100.
1. Watch the paint dry.
2. Slap those babies on.
You do not have the required permissions to view the files attached to this post.
Klapatta
 
Posts: 1017
Joined: Mon Sep 06, 2010 2:25 pm
City and State: Rockingham VT.
First and Last Name: Kenneth LaPatta

Re: Paint pics......

Postby dag1450 » Thu Oct 18, 2018 5:12 pm

LOOKS GREAT MAN! I screwed up.....the whole time im doing this tractor i thought i had two new cans of the cnh iron gard yellow. I finally get the box down and one is not full and the other is white :o. I have Hoober shipping me two...should have been here today, maybe tomorrow. i cant paint till next week anyway
127, 1650, 1572, 1872, 2072 x 2 . A mower, blower and blade for each.
User avatar
dag1450
 
Posts: 1964
Images: 12
Joined: Fri Apr 01, 2011 3:16 pm
City and State: Chalfont, Pa
First and Last Name: Dave Gibson

Re: Paint pics......

Postby Klapatta » Fri Oct 19, 2018 10:02 am

I'm unwilling to commit to any restoration that extensive. A little splash of paint here and there does a lot, don't it? ;)
DSCN8193.JPG
You do not have the required permissions to view the files attached to this post.
Klapatta
 
Posts: 1017
Joined: Mon Sep 06, 2010 2:25 pm
City and State: Rockingham VT.
First and Last Name: Kenneth LaPatta

Re: Paint pics......

Postby dag1450 » Tue Oct 23, 2018 8:33 pm

I finally got my cnh paint. I'm not real happy with it.... it's a shade light. Is that what you were referring to Ken? It's called like "industrial/federal yellow". Why they need to mess with stuff is beyond me. Probably not much call for this paint anymore....idk. Im not like OCD....but I bought this cause in the past the color has been spot on in my opinion. Im all ready and hope to spray tomorrow afternoon. I may hit the paint shop to add a drop of red to take the "sun burst" out of it. :(
IMG_20181023_143727919.jpg
You do not have the required permissions to view the files attached to this post.
127, 1650, 1572, 1872, 2072 x 2 . A mower, blower and blade for each.
User avatar
dag1450
 
Posts: 1964
Images: 12
Joined: Fri Apr 01, 2011 3:16 pm
City and State: Chalfont, Pa
First and Last Name: Dave Gibson

Re: Paint pics......

Postby Klapatta » Wed Oct 24, 2018 11:31 am

Dave, I don't really see myself as offering professional opinion when it comes to higher end automotive type refinishing. But I can only tell you what I did.
The weights in the work bench image do appear lighter however I think that was caused by the overhead fluorescent lighting. When they were mounted on the tractor the shade in day light appeared much closer if not right on. That can be noted in my previous photos.
I was running low on the IH Iron Gard spray paint with only one can left so I painted the inside of the weights with Rust-Oleum farm and implement New Holland yellow and that was a definite lighter yellow. The outside of them was done with the spray Iron Gard stuff. Now that can was probably 3 years old so yes they may have changed the shade a bit since then.
DSCN8210.JPG

Now this Martin Senior 483B stuff that I had mixed about ten years ago was another matter. I think that can was spot on. The marking on the can describe it as Safety yellow. This is the what I brushed on the inside of the fenders strictly for protection of the metal.
DSCN8137.JPG
You do not have the required permissions to view the files attached to this post.
Klapatta
 
Posts: 1017
Joined: Mon Sep 06, 2010 2:25 pm
City and State: Rockingham VT.
First and Last Name: Kenneth LaPatta

Next

Return to The Coffee Shop

Who is online

Users browsing this forum: No registered users and 5 guests