Tractor ramps
- dag1450
- Posts: 2365
- Joined: Fri Apr 01, 2011 3:16 pm
- First and Last Name: Dave Gibson
- Location: Chalfont, Pa
Tractor ramps
duke.....this is for u brother! Made these a couple years ago. I have lots of things to lift the front end with....but i could not find an easy or safe way to do it. I did not want to jack on the mule/ undercarrage....if u try to lift with a strap the front end nose is in the way...or the side tins. Everything had a big downside to it, so i put on my thinkin cap.lol The ramps r "pinned" on to the box with 2 bolts that slide into holes. Then the ramps just lift off.
127, 1650, 1572, 1872, 2072 . A mower, blower and blade for each.
- dag1450
- Posts: 2365
- Joined: Fri Apr 01, 2011 3:16 pm
- First and Last Name: Dave Gibson
- Location: Chalfont, Pa
Re: Tractor ramps
and one of the sharp blades and oiled underside.
127, 1650, 1572, 1872, 2072 . A mower, blower and blade for each.
-
- Posts: 114
- Joined: Sun Mar 10, 2013 10:51 pm
- First and Last Name: john carolan
- Location: decorah, IA
Re: Tractor ramps
Very nice.I like how you can take the ramp out of your way
My car ramps work good but they do get in the way for easy cleaning.
I have been thinking about making a permanent gt ramp that lets all 4 tires of the ground.But i have been planing this a couple years now
You got a new quit line?
I will have to find that post.I dont have much time this time of year to follow
My car ramps work good but they do get in the way for easy cleaning.
I have been thinking about making a permanent gt ramp that lets all 4 tires of the ground.But i have been planing this a couple years now
You got a new quit line?
I will have to find that post.I dont have much time this time of year to follow
- daraabi
- Posts: 40
- Joined: Mon Jan 26, 2015 8:10 am
- First and Last Name: Adam R
- Location: Daytona, FL
Re: Tractor ramps
How do you keep the tractor from rolling off the ramps? Chocks?
- dag1450
- Posts: 2365
- Joined: Fri Apr 01, 2011 3:16 pm
- First and Last Name: Dave Gibson
- Location: Chalfont, Pa
Re: Tractor ramps
To chock or not to chock....that is the question? Well adam.....I push on the brake peddle and lock the peddle in the "on" position! Sometimes i chock.....if i remember. I do not get back on the tractor to bring it down as it is kinda hard to do that on that angle. I do a controlled roll back down holding the brake peddle.... i dont want to start the engine till oil is back on the level. Dave
127, 1650, 1572, 1872, 2072 . A mower, blower and blade for each.