Shop organization
- dag1450
- Posts: 2377
- Joined: Fri Apr 01, 2011 3:16 pm
- First and Last Name: Dave Gibson
- Location: Chalfont, Pa
Shop organization
I have this space over a small work counter in my workshop. I was thinking peg board but really looked at my needs and peg board wasn't it. Having an old hack saw and some wrenches hanging on a peg board didn't sound very appealing.
So....I'm thinking less words ....and more pictures will tell the story.
So....I'm thinking less words ....and more pictures will tell the story.
127, 1650, 1572, 1872, 2072 . A mower, blower and blade for each.
-
- Posts: 555
- Joined: Mon Sep 06, 2010 10:19 am
- First and Last Name: Dave Kamp
- Location: LeClaire, Ia
Re: Shop organization
Lookin' Good, Dave!
I'm kinda workin' in the 'organizing' direction, but it's not so much a case of 'need bins to put my bolts', as it is... I need to dedicate one portion of one building to be nothing but a hardware-store of machine screws, another of wood screws, one of electrical and electronic components, one of hydraulic components, another of just fittings... then there's PEX fittings, hose, tires, electrical wire...
Wierd Al has a great song called "Hardware Store'... he addresses about HALF of what I gotta deal with...
https://www.youtube.com/watch?v=DFI6cV9slfI
I'm kinda workin' in the 'organizing' direction, but it's not so much a case of 'need bins to put my bolts', as it is... I need to dedicate one portion of one building to be nothing but a hardware-store of machine screws, another of wood screws, one of electrical and electronic components, one of hydraulic components, another of just fittings... then there's PEX fittings, hose, tires, electrical wire...
Wierd Al has a great song called "Hardware Store'... he addresses about HALF of what I gotta deal with...
https://www.youtube.com/watch?v=DFI6cV9slfI
Yes, I'm a Mad Scientist... but I'm usually happy, even when things ain't goin right.
-
- Posts: 1364
- Joined: Mon Sep 06, 2010 2:25 pm
- First and Last Name: Kenneth LaPatta
- Location: Rockingham VT.
Re: Shop organization
Way to go Dave. My nut and bolt organizer is made from old Cream cheese boxes.
It came with the house and I have no idea how old it is.
It came with the house and I have no idea how old it is.
- dag1450
- Posts: 2377
- Joined: Fri Apr 01, 2011 3:16 pm
- First and Last Name: Dave Gibson
- Location: Chalfont, Pa
Re: Shop organization
Thanks guys. Those cheese boxes are cool Ken. Just goes to show how real wood and good jointery will last a very long time. I have always liked those "box corners"! I'm thinking my plastic bins will also last a long time...
127, 1650, 1572, 1872, 2072 . A mower, blower and blade for each.
- SWilliams
- Posts: 806
- Joined: Mon Sep 06, 2010 7:14 pm
- First and Last Name: Steve Williams
- Location: Fort Plain NY (Upstate NY near Cooperstown)
Re: Shop organization
Shop Organization... What language is that? I don't understand... (A suggestion for those who use the open bins, attach thin clear plastic sheets over them. Keeps all the dust/dirt/flying debris out so when you go to get something they are at least clean)
Owner of an 1863, 2263 (1863 W 22hp engine!) 2084 and a 2 - 2284s.
"In God we trust, All others pay CASH..."
"In God we trust, All others pay CASH..."
- dag1450
- Posts: 2377
- Joined: Fri Apr 01, 2011 3:16 pm
- First and Last Name: Dave Gibson
- Location: Chalfont, Pa
Re: Shop organization
Yep Steve that is a problem and compound that with this is mostly a wood shop. When I got all done I asked my wife to come out and see my creation. She looks at my old setup and says.."how will you keep the dust out". I said.... maybe an air gun every once and a while. At this point I was pretty excited for two reasons. I was done with the bins ...and my wife made her annual visit to the shop.
127, 1650, 1572, 1872, 2072 . A mower, blower and blade for each.
- SWilliams
- Posts: 806
- Joined: Mon Sep 06, 2010 7:14 pm
- First and Last Name: Steve Williams
- Location: Fort Plain NY (Upstate NY near Cooperstown)
Re: Shop organization
That was the issue I have with bin storage. I bought clear vinyl from a craft store and installed it over the bins. Helps a lot. I've been looking at new bins that would be more like the old pigeon hole types the hardware stores had. Something like the Durham units.
Owner of an 1863, 2263 (1863 W 22hp engine!) 2084 and a 2 - 2284s.
"In God we trust, All others pay CASH..."
"In God we trust, All others pay CASH..."
- dag1450
- Posts: 2377
- Joined: Fri Apr 01, 2011 3:16 pm
- First and Last Name: Dave Gibson
- Location: Chalfont, Pa
Re: Shop organization
I thought I would piggy back this on here because it deals with the shop. I have wanted a light for a long time. I looked at a lot of different fancy lights....but decided on 40 watts of old school. I made the wiring look as factory as possible by tieing into the switch back.
127, 1650, 1572, 1872, 2072 . A mower, blower and blade for each.
-
- Posts: 254
- Joined: Tue Jan 12, 2016 10:30 pm
- First and Last Name: Dave Davis
- Location: Quantico,MD (Formerly from Lee Center,NY)
Re: Shop organization
Looks good, but put an LED bulb in there!
And why is the first aid kit on the floor?
And why is the first aid kit on the floor?
- Tom Scott
- Chief Moderator
- Posts: 1777
- Joined: Mon Sep 06, 2010 9:11 pm
- First and Last Name: Tom Scott
- Location: Bentley Springs, Maryland
Re: Shop organization
dag - I like it. And I actually still prefer incandescent bulbs for some stuff like this. Incandescent light is easy on the eyes.
D2 - That's dag thinking ahead... He knows that while working he'll be so distracted thinking of ways to poke a stick at Big Mike that he's bound to get hurt. Since he's likely to get hurt bad enough that he falls to the floor it's now just a short crawl to the first aid kit!
1872, 46", 50C decks, Haban dozer blade, 450 snow blower
2182-1, Kwik-Way Loader, 3-pt & rear pto, 442 tiller
2182-2, 54" deck, 551 snow blower
Past tractors: 1541, 2135
<><
2182-1, Kwik-Way Loader, 3-pt & rear pto, 442 tiller
2182-2, 54" deck, 551 snow blower
Past tractors: 1541, 2135
<><
- dag1450
- Posts: 2377
- Joined: Fri Apr 01, 2011 3:16 pm
- First and Last Name: Dave Gibson
- Location: Chalfont, Pa
Re: Shop organization
Yes LEDs have their place but they can look and feel funny. I have been installing many led high bay lights at a factory and man is it harsh! They are probably in the 5000-6000 color. Ouch.
So the first aid kit at home gets tossed around as it doesn't have a good home and Tom wasn't far off. But I snapped a photo of our kit at work. We don't encourage guys to use it as the supply chain shortage is in full effect. But when you do get hurt by all means open it up and use as directed!
So the first aid kit at home gets tossed around as it doesn't have a good home and Tom wasn't far off. But I snapped a photo of our kit at work. We don't encourage guys to use it as the supply chain shortage is in full effect. But when you do get hurt by all means open it up and use as directed!
127, 1650, 1572, 1872, 2072 . A mower, blower and blade for each.
-
- Posts: 254
- Joined: Tue Jan 12, 2016 10:30 pm
- First and Last Name: Dave Davis
- Location: Quantico,MD (Formerly from Lee Center,NY)
Re: Shop organization
I have to admit the kit on the floor just may be practical.Tom Scott wrote: ↑Sun Mar 20, 2022 11:17 amdag - I like it. And I actually still prefer incandescent bulbs for some stuff like this. Incandescent light is easy on the eyes.
D2 - That's dag thinking ahead... He knows that while working he'll be so distracted thinking of ways to poke a stick at Big Mike that he's bound to get hurt. Since he's likely to get hurt bad enough that he falls to the floor it's now just a short crawl to the first aid kit!
- Tom Scott
- Chief Moderator
- Posts: 1777
- Joined: Mon Sep 06, 2010 9:11 pm
- First and Last Name: Tom Scott
- Location: Bentley Springs, Maryland
Re: Shop organization
Crickey, dag will just not be outdone! We now have to come up with "stage props" to stay in the game! I'm tapping out, dag wins!!
1872, 46", 50C decks, Haban dozer blade, 450 snow blower
2182-1, Kwik-Way Loader, 3-pt & rear pto, 442 tiller
2182-2, 54" deck, 551 snow blower
Past tractors: 1541, 2135
<><
2182-1, Kwik-Way Loader, 3-pt & rear pto, 442 tiller
2182-2, 54" deck, 551 snow blower
Past tractors: 1541, 2135
<><
- BigMike
- Posts: 1359
- Joined: Mon Sep 06, 2010 8:45 pm
- First and Last Name: Mike Andrews
- Location: Niles,Michigan
Re: Shop organization
Dag, Dag, Dag.....you know that calling me in an emergency situation is only going to get a prescription for an enema?!!!!!
Of course that script is going to require a honey wagon with your level of BS
Tom, I wonder how long it will take for him to realize he has NO chance of winning this.
P.S. that picture is going up next to my Wahhhmbulance picture in the shop!
Of course that script is going to require a honey wagon with your level of BS
Tom, I wonder how long it will take for him to realize he has NO chance of winning this.
P.S. that picture is going up next to my Wahhhmbulance picture in the shop!
- dag1450
- Posts: 2377
- Joined: Fri Apr 01, 2011 3:16 pm
- First and Last Name: Dave Gibson
- Location: Chalfont, Pa
Re: Shop organization
Oh yes...a skit with props involving Toms enema and a honey dipper! NO Thanks! Haven't you caused enough trouble
127, 1650, 1572, 1872, 2072 . A mower, blower and blade for each.
- Tom Scott
- Chief Moderator
- Posts: 1777
- Joined: Mon Sep 06, 2010 9:11 pm
- First and Last Name: Tom Scott
- Location: Bentley Springs, Maryland
Re: Shop organization
Oof... these are visuals I don't need! Let's get back to bolt bins and other shop organization. I'll stick with the phone in the First Aid Kit visual, I liked that one!
1872, 46", 50C decks, Haban dozer blade, 450 snow blower
2182-1, Kwik-Way Loader, 3-pt & rear pto, 442 tiller
2182-2, 54" deck, 551 snow blower
Past tractors: 1541, 2135
<><
2182-1, Kwik-Way Loader, 3-pt & rear pto, 442 tiller
2182-2, 54" deck, 551 snow blower
Past tractors: 1541, 2135
<><
-
- Posts: 254
- Joined: Tue Jan 12, 2016 10:30 pm
- First and Last Name: Dave Davis
- Location: Quantico,MD (Formerly from Lee Center,NY)
Re: Shop organization
I was thinking slurry store for the BS WE spew around here!!!BigMike wrote: ↑Tue Mar 22, 2022 1:47 pmDag, Dag, Dag.....you know that calling me in an emergency situation is only going to get a prescription for an enema?!!!!!
Of course that script is going to require a honey wagon with your level of BS
Tom, I wonder how long it will take for him to realize he has NO chance of winning this.
P.S. that picture is going up next to my Wahhhmbulance picture in the shop!