PTO Clutch Issue
-
- Posts: 12
- Joined: Sat Mar 10, 2012 10:38 am
- First and Last Name: Scott Wyss
- Location: Granbury, TX
PTO Clutch Issue
Went to mow yesterday with my 1989 1050 and noticed the PTO clutch would not disengage unless I turned the key off. When flipping the PTO switch it does nothing so it is always engaged. What should I look for in troubleshooting this? Bad switch, faulty wire, etc. . . It's obvious it is getting power, since the clutch will engage/disengage with the key on/off. Any help is appreciated.
- VScott
- Posts: 362
- Joined: Wed Sep 15, 2010 8:47 pm
- First and Last Name: V Scott
- Location: St.Louis, Mo
Re: PTO Clutch Issue
Scott,
Has the bearing locked up?
Has the bearing locked up?
-
- Posts: 12
- Joined: Sat Mar 10, 2012 10:38 am
- First and Last Name: Scott Wyss
- Location: Granbury, TX
Re: PTO Clutch Issue
The bearing is fine, it has to be the switch or relay. When I jumper the PTO it engages. Anyone know of way to test the relay or switch?