2082 no start after 18 hp engine swap

This is where we can discuss all the stuff made after IH's sale to MTD.

2082 no start after 18 hp engine swap

Postby kbrothers » Mon May 14, 2018 3:08 pm

PTO went out on my 2082 and starter has acted up since I changed it so I decided to pull the motor out of my 1882 mower that the hydro went out on last year. Got the swap finished today but it won't run. I did notice the 2082 engine had an extra wire on the positive starter post which the 1882 didn't all help and info appreciated greatly TIA Ken in PA
kbrothers
 
Posts: 247
Joined: Mon Sep 06, 2010 6:38 am
City and State: Ebensburg, PA
First and Last Name: Ken Brothers

Re: 2082 no start after 18 hp engine swap

Postby SWilliams » Mon May 14, 2018 7:42 pm

Here are the wiring diagrams for both.

1882.pdf


2082.pdf
You do not have the required permissions to view the files attached to this post.
Owner of 129, 1641, 1863, 2263 (1863 W 22hp engine!) 2084 and a 2284.

"In God we trust, All others pay CASH..."
User avatar
SWilliams
 
Posts: 632
Images: 3
Joined: Mon Sep 06, 2010 7:14 pm
City and State: Fort Plain NY (Upstate NY near Cooperstown)
First and Last Name: Steve Williams

Re: 2082 no start after 18 hp engine swap

Postby kbrothers » Tue May 15, 2018 6:29 am

Thanks,Steve I think maybe the problem is the 1882 engine is out of a low serial # 314469 tractor? All info I find is for 800000 and up Thanks again
kbrothers
 
Posts: 247
Joined: Mon Sep 06, 2010 6:38 am
City and State: Ebensburg, PA
First and Last Name: Ken Brothers

Re: 2082 no start after 18 hp engine swap

Postby JMotuzick » Tue May 15, 2018 10:18 am

314xxx would make it a Narrow Frame. I’m guessing the s/n is 814xxx. With out looking at the schematic they should have the same wiring....
JMotuzick
Moderator
 
Posts: 873
Joined: Tue Sep 07, 2010 6:22 pm
City and State: Torrington Ct
First and Last Name: Joe Motuzick

Re: 2082 no start after 18 hp engine swap

Postby l palma » Tue May 15, 2018 11:23 am

When you say no start, does it turn over or not?
Both tractors use the same harness, according to this wiring diagram, so here is what I have for you.
You do not have the required permissions to view the files attached to this post.
User avatar
l palma
 
Posts: 718
Joined: Mon Sep 06, 2010 9:46 am
City and State: Montague, N.J.
First and Last Name: Lew Palma

Re: 2082 no start after 18 hp engine swap

Postby kbrothers » Sun May 27, 2018 5:07 pm

Thanks Lewis Got it running it was a carb issue from setting Then had a pulley issue. Tomorrow I have to find out where the hydro is leaking from-oil all over the floor after mowing and setting overnight
kbrothers
 
Posts: 247
Joined: Mon Sep 06, 2010 6:38 am
City and State: Ebensburg, PA
First and Last Name: Ken Brothers


Return to CCC and MTD Built Cub cadets

Who is online

Users browsing this forum: No registered users and 2 guests

cron