1772 pto

This is where we can discuss all the stuff made after IH's sale to MTD.
Post Reply
jrarick
Posts: 33
Joined: Mon Sep 06, 2010 6:32 am
First and Last Name: Jim Rarick
Location: Morriston, FL

1772 pto

Post by jrarick »

I believe the pto bearing is starting to go bad on my 1772 diesel.. Anyone know where I could find some how to information
to make this repair? Does not look to be an easy project. thanks Jim

User avatar
red82s
Posts: 126
Joined: Mon Sep 06, 2010 2:45 pm
First and Last Name: Adrian Gitch
Location: Paris, KY

Re: 1772 pto

Post by red82s »

I had to do this last year. It is a pain since you have to remove the radiator so I'd do a good cleaning of the radiator while it's out. I think there's two bearings in there if I remember correctly. Once you get the radiator out of the way, it's pretty easy. I would also check out the cooling fan bearings while your at it since those are replaceable too.
Adrian

jrarick
Posts: 33
Joined: Mon Sep 06, 2010 6:32 am
First and Last Name: Jim Rarick
Location: Morriston, FL

Re: 1772 pto

Post by jrarick »

thanks Adrian
Were you able to match up the bearings and purchase local? I see on cub parts they only sell the complete pto.
Just trying to find out all I can before starting to tear it down so any information is very much appreciated.
Jim

User avatar
red82s
Posts: 126
Joined: Mon Sep 06, 2010 2:45 pm
First and Last Name: Adrian Gitch
Location: Paris, KY

Re: 1772 pto

Post by red82s »

Yes, the bearings were available local at a bearing supply place.
Adrian

Post Reply