This is an 1810 with a 450 snow thrower attachment.It came with a 44" deck, 75lb plastic wheel weights,all the manuals even the thrower,and a new box of hardened blades.The mag 18 was rebuild it,has an oil filter on it. Used 5 times then stored for three years....outside ahhhhhggg.So far I replaced the Ignition switch with one I had,Cleaned all the grounds,a few squirts of gas and it started right up,ate dinner now nothing not even a click....so time to check out the other safety switches.
I like the idea of putting this motor in my 582 or the 1211.
The 1810
- vince_o
- Moderator
- Posts: 2045
- Joined: Mon Sep 06, 2010 3:20 am
- First and Last Name: Vince Ochiuto
- Location: Pickens, SC
Re: The 1810
dang Lew do you even work or just hunt?
"It's a damn poor mind that can only think of one way to spell a word."
-Andrew Jackson
-Andrew Jackson
- l palma
- Posts: 738
- Joined: Mon Sep 06, 2010 9:46 am
- First and Last Name: Lew Palma
- Location: Montague, N.J.
Re: The 1810
I Don"t do roofing in the rain Vince...and it rained today...
The price was right ,that's for sure
The price was right ,that's for sure
Last edited by l palma on Tue Aug 16, 2011 10:58 pm, edited 1 time in total.
-
- Posts: 88
- Joined: Fri Jun 24, 2011 10:31 pm
- First and Last Name: Jack Hammer
- Location: Kingston NY
Re: The 1810
You got that in Kingston or Tillson?
Cub Cadet 104
1957 International Cub Lo Boy
1987 John Deere 850 4X4 diesel
2 Kawasaki Triples S3 and an H1
1957 International Cub Lo Boy
1987 John Deere 850 4X4 diesel
2 Kawasaki Triples S3 and an H1
- l palma
- Posts: 738
- Joined: Mon Sep 06, 2010 9:46 am
- First and Last Name: Lew Palma
- Location: Montague, N.J.
Re: The 1810
Pittstown...
This thing has a waldo carb on it,
It runs but it will not stay running so I will clean the carb and see what happens.
This one looks like it was in a demo derby.
This thing has a waldo carb on it,
It runs but it will not stay running so I will clean the carb and see what happens.
This one looks like it was in a demo derby.
- l palma
- Posts: 738
- Joined: Mon Sep 06, 2010 9:46 am
- First and Last Name: Lew Palma
- Location: Montague, N.J.
Re: The 1810
Cleaned the carb today and removed all the tin to see how big a mouse nest was in there...
He's a biggin...
This runs really nice now,purrs like a kitten,If I put this in the 1211 do you think the wire harness has the additional wires in it to run the oil light?
He's a biggin...
This runs really nice now,purrs like a kitten,If I put this in the 1211 do you think the wire harness has the additional wires in it to run the oil light?
- Jeff in Pa
- Posts: 665
- Joined: Sun Sep 12, 2010 8:06 am
- First and Last Name: Jeff Derstine
- Location: Zionsville,PA