Super Garden Tractor Lowering Kit for 451 blower
- TractorDan
- Posts: 79
- Joined: Tue Sep 27, 2011 8:02 pm
- First and Last Name: Dan Cocsorso
- Location: Central, IL
Super Garden Tractor Lowering Kit for 451 blower
I'm having no luck finding a lowering kit/Carriage Bracket Extension Kit to connect my 451 blower to my 2082. If anybody has these brackets on thier unit, would you be so kind as to take some measurements of the plate size and hole centers? "If man can think it, Man can make it" time.
The origianal kit part number is "Carriage Bracket Extension Kit 190-529"…this has everything, belt, hardware, spacers. I can piece together the kit but the item I can’t find is part number 784-5407 Carriage Extension Bracket quantity 2 (Right & Left) these I will make.
The origianal kit part number is "Carriage Bracket Extension Kit 190-529"…this has everything, belt, hardware, spacers. I can piece together the kit but the item I can’t find is part number 784-5407 Carriage Extension Bracket quantity 2 (Right & Left) these I will make.
383 w/deck & snowplow
2072 w/loader
2082 w/deck & plow & blower
1772 w/deck
128 w/deck
1949 Cub w/deck, plow, & snowplow
M-48 Tank w/deck & Snowplow
Mowett Mustang 5hp
71 w/deck
2072 w/loader
2082 w/deck & plow & blower
1772 w/deck
128 w/deck
1949 Cub w/deck, plow, & snowplow
M-48 Tank w/deck & Snowplow
Mowett Mustang 5hp
71 w/deck
- TractorDan
- Posts: 79
- Joined: Tue Sep 27, 2011 8:02 pm
- First and Last Name: Dan Cocsorso
- Location: Central, IL
Re: Super Garden Tractor Lowering Kit for 451 blower
Yes, I sent emails to the vendors listed, those that have responded said "NO" they don't have the part.
383 w/deck & snowplow
2072 w/loader
2082 w/deck & plow & blower
1772 w/deck
128 w/deck
1949 Cub w/deck, plow, & snowplow
M-48 Tank w/deck & Snowplow
Mowett Mustang 5hp
71 w/deck
2072 w/loader
2082 w/deck & plow & blower
1772 w/deck
128 w/deck
1949 Cub w/deck, plow, & snowplow
M-48 Tank w/deck & Snowplow
Mowett Mustang 5hp
71 w/deck
- Tom Scott
- Chief Moderator
- Posts: 1776
- Joined: Mon Sep 06, 2010 9:11 pm
- First and Last Name: Tom Scott
- Location: Bentley Springs, Maryland
Re: Super Garden Tractor Lowering Kit for 451 blower
Ray has had them made in the past. You need to call Ray (not email), usually best in the evening, like 8 pm or so.
1872, 46", 50C decks, Haban dozer blade, 450 snow blower
2182-1, Kwik-Way Loader, 3-pt & rear pto, 442 tiller
2182-2, 54" deck, 551 snow blower
Past tractors: 1541, 2135
<><
2182-1, Kwik-Way Loader, 3-pt & rear pto, 442 tiller
2182-2, 54" deck, 551 snow blower
Past tractors: 1541, 2135
<><
-
- Posts: 19
- Joined: Sat Sep 18, 2010 9:44 am
- First and Last Name: Tom Schulte
- Location: Columbus, OH
Re: Super Garden Tractor Lowering Kit for 451 blower
Ray Weaver did have them fabricated and I purchased some from him last year.
- SWilliams
- Posts: 806
- Joined: Mon Sep 06, 2010 7:14 pm
- First and Last Name: Steve Williams
- Location: Fort Plain NY (Upstate NY near Cooperstown)
Re: Super Garden Tractor Lowering Kit for 451 blower
They are nothing special. Just grab some 3/16" stee,. Cut it so it bridges the lower two holes with an inch or so overlap. The second set of lower holes should be about 3" or so lower. Then bend them in the middle to offset them enough so they end up the same as the original frame width. They drop the blower pivots down to compensate for the taller tires on the supers. Without them the blower will set nose down and not work properly.
If you need a better measurement drive the front tires onto a 1"-1 1/2" thick board. Now pull the lower pin out of the mount and attach the mount to the tractor. Now lift the pivot up so it stops but the blower sets level on the floor. Measure the distance between the holes for the pin.
If you need a better measurement drive the front tires onto a 1"-1 1/2" thick board. Now pull the lower pin out of the mount and attach the mount to the tractor. Now lift the pivot up so it stops but the blower sets level on the floor. Measure the distance between the holes for the pin.
Owner of an 1863, 2263 (1863 W 22hp engine!) 2084 and a 2 - 2284s.
"In God we trust, All others pay CASH..."
"In God we trust, All others pay CASH..."
-
- Posts: 45
- Joined: Mon Sep 27, 2010 7:02 pm
- First and Last Name: Dwight Byers
- Location: Butler, PA.
Re: Super Garden Tractor Lowering Kit for 451 blower
Dan,
The simplest thing would be to send that 2082 my way.
Since that’s probably not going to happen, here is some info.
The extension plates are made from 3/16 inch steel and are 5.25 x 4 inches.
The holes are 5/8th. They are 3 5/8th center to center horizontally and 2.5 vertically center to center.
The plates have an offset bend for the thickness of the plates. I would think a couple flat washers would work fine.
Good luck,
Ike
The simplest thing would be to send that 2082 my way.
Since that’s probably not going to happen, here is some info.
The extension plates are made from 3/16 inch steel and are 5.25 x 4 inches.
The holes are 5/8th. They are 3 5/8th center to center horizontally and 2.5 vertically center to center.
The plates have an offset bend for the thickness of the plates. I would think a couple flat washers would work fine.
Good luck,
Ike
Take Care,
Ike
“Integrity – Doing the right thing when no-one is looking”
Ike
“Integrity – Doing the right thing when no-one is looking”
- SWilliams
- Posts: 806
- Joined: Mon Sep 06, 2010 7:14 pm
- First and Last Name: Steve Williams
- Location: Fort Plain NY (Upstate NY near Cooperstown)
Re: Super Garden Tractor Lowering Kit for 451 blower
You would be better with the bent offset. It helps keep the blower tracking straight by acting as a guide for the pivots. 2.5 - 3" works well. Especially if you run ags or tri-ribs as they tend to be taller than turf tires.
Owner of an 1863, 2263 (1863 W 22hp engine!) 2084 and a 2 - 2284s.
"In God we trust, All others pay CASH..."
"In God we trust, All others pay CASH..."
- TractorDan
- Posts: 79
- Joined: Tue Sep 27, 2011 8:02 pm
- First and Last Name: Dan Cocsorso
- Location: Central, IL
Re: Super Garden Tractor Lowering Kit for 451 blower
Perfect, thank you for the great responses. Appreciate the pictures of the actual plates and the picture of the mounted blower on the tractor. I went to a freinds house last night to look at his blower unit, as he does not have the extension plates. The Blower hits the ground, however it is on a slight angle, and upon raising the unit it noses down first and then raises. I beleave he is now aware of the extra parts needed and will be adding them prior to winter. As I will be too.
Thanks,
Danny
Thanks,
Danny
383 w/deck & snowplow
2072 w/loader
2082 w/deck & plow & blower
1772 w/deck
128 w/deck
1949 Cub w/deck, plow, & snowplow
M-48 Tank w/deck & Snowplow
Mowett Mustang 5hp
71 w/deck
2072 w/loader
2082 w/deck & plow & blower
1772 w/deck
128 w/deck
1949 Cub w/deck, plow, & snowplow
M-48 Tank w/deck & Snowplow
Mowett Mustang 5hp
71 w/deck
- SWilliams
- Posts: 806
- Joined: Mon Sep 06, 2010 7:14 pm
- First and Last Name: Steve Williams
- Location: Fort Plain NY (Upstate NY near Cooperstown)
Re: Super Garden Tractor Lowering Kit for 451 blower
Here is a quick drawing of the plate. Holes are symmetrical so the dimensions work for all 4 holes.
The 4 " is the finished height so I would probably make the bend first, or make a test part and see what the offset allowance would be.
The 4 " is the finished height so I would probably make the bend first, or make a test part and see what the offset allowance would be.
Owner of an 1863, 2263 (1863 W 22hp engine!) 2084 and a 2 - 2284s.
"In God we trust, All others pay CASH..."
"In God we trust, All others pay CASH..."
- TractorDan
- Posts: 79
- Joined: Tue Sep 27, 2011 8:02 pm
- First and Last Name: Dan Cocsorso
- Location: Central, IL
Re: Super Garden Tractor Lowering Kit for 451 blower
Nice Steve. Thanks for taking the effort to post the drawing. In addition, to the earlier photos, I have more than I need to get this done.
383 w/deck & snowplow
2072 w/loader
2082 w/deck & plow & blower
1772 w/deck
128 w/deck
1949 Cub w/deck, plow, & snowplow
M-48 Tank w/deck & Snowplow
Mowett Mustang 5hp
71 w/deck
2072 w/loader
2082 w/deck & plow & blower
1772 w/deck
128 w/deck
1949 Cub w/deck, plow, & snowplow
M-48 Tank w/deck & Snowplow
Mowett Mustang 5hp
71 w/deck
-
- Posts: 43
- Joined: Tue Sep 14, 2010 9:10 am
- First and Last Name: Mark Scheller
- Location: York,Pa.
Re: Super Garden Tractor Lowering Kit for 451 blower
I bought these pieces about 2 years ago from my dealer.
They're probably still available now.
They're probably still available now.
-
- Posts: 1
- Joined: Sun May 01, 2011 10:24 pm
- First and Last Name: Earl Williams
- Location: Springville, NY
Re: Super Garden Tractor Lowering Kit for 451 blower
i have the complete kit. I had the brackets made by a friend who is a metal fabricator. I have one original bracket and the other one is fabricated. I have the spacers, belt, and bolts. Let me know if interested. You can call/text me at 7162891413 because I rarely check in on this site. I bought the parts this winter but never installed the blower. I have a 2084 and it is the same part number, 529 and I had a 451 blower.
Thanks,
Earl
Thanks,
Earl
-
- Moderator
- Posts: 1175
- Joined: Tue Sep 07, 2010 6:22 pm
- First and Last Name: Joe Motuzick
- Location: Torrington Ct
Re: Super Garden Tractor Lowering Kit for 451 blower
Earl
I’m guessing that he found something, this thread is 6 1/2 years old!
I’m guessing that he found something, this thread is 6 1/2 years old!