sunstrand transmission

This is where we can discuss all the stuff made after IH's sale to MTD.
Post Reply
ronniec
Posts: 107
Joined: Mon Sep 06, 2010 11:51 am
First and Last Name: Ronnie Chapman
Location: grand junction michigan

sunstrand transmission

Post by ronniec »

has anybody ever done the seals and gaskets on these trans missions and is there a write up on the tear down and reassembly
and is there a manual on these thank you
have snow must plow

User avatar
Tom Scott
Chief Moderator
Posts: 1763
Joined: Mon Sep 06, 2010 9:11 pm
First and Last Name: Tom Scott
Location: Bentley Springs, Maryland

Re: sunstrand transmission

Post by Tom Scott »

Ronnie - The manual for the 82 series covers the 1811. The same transmission was used in most of the Cyclops tractors and that manual states things a little differently, it can sometime make things clearer to read both. All of these manuals are in the link at the top of the page in the blue bar.
1872, 46", 50C decks, Haban dozer blade, 450 snow blower
2182-1, Kwik-Way Loader, 3-pt & rear pto, 442 tiller
2182-2, 54" deck, 551 snow blower
Past tractors:  1541, 2135
<><

Post Reply