CC682

This is where we can discuss all the stuff made after IH's sale to MTD.
Post Reply
OhioBinder
Posts: 149
Joined: Mon Sep 06, 2010 8:42 am
First and Last Name: David Gregg
Location: NW oIHo

CC682

Post by OhioBinder »

Brought home a CC682.Made by Cub Cadet, Cleveland, Ohio. It is a one owner tractor that has never ever sat out. Only has 195 hours on it. Is the most hardest starting tractor I have ever been around. I have been around this one for17 years or so. Always has been a chore to get started. Seems to not be getting any gas. But once started runs like a champ. The air cleaner doesn't say Series II on it so it must be a series I KT17. Or is there a better way to tell which series of engine it would have.
IMG_7554 (Small).JPG
IMG_7554 (Small).JPG (98.64 KiB) Viewed 4846 times
IMG_7555 (Small).JPG
IMG_7555 (Small).JPG (95.14 KiB) Viewed 4846 times
IMG_7556 (Small).JPG
IMG_7556 (Small).JPG (95.01 KiB) Viewed 4846 times
IMG_7559 (Small).JPG
IMG_7559 (Small).JPG (100.62 KiB) Viewed 4846 times
IMG_7557 (Small).JPG
IMG_7557 (Small).JPG (93.35 KiB) Viewed 4846 times
I has a cast iron rear end and aluminum axle housings.
Now the big question is do I keep it or service it and send it to my son so I can get my 1650 back.
David Gregg
NW oIHo

User avatar
dag1450
Posts: 2356
Joined: Fri Apr 01, 2011 3:16 pm
First and Last Name: Dave Gibson
Location: Chalfont, Pa

Re: CC682

Post by dag1450 »

Sweet machine! Looks like it just needs a bath. I think the series 1 mostly had trouble on hills and lack of lubercation. Good luck and keep us posted!
127, 1650, 1572, 1872, 2072 . A mower, blower and blade for each.

User avatar
ksanders
Posts: 930
Joined: Mon Sep 06, 2010 2:56 pm
First and Last Name: Kevin Sanders
Location: Sellersburg, Indiana

Re: CC682

Post by ksanders »

I thought all cc built ones had the series 2 but not 100%. What's the serial number? Maybe it was really early and got a series 1. I've had the little "valves" or whatever they are pop loose on several fuel pumps on those. They'll still run but lose prime and take forever to start because the fuel doesn't want to prime. It's easy to take the pump off, open it up, and look at those two round valves in there.
From the first Original to the last x82 Series... you can't beat an IH Cub Cadet!!!

OhioBinder
Posts: 149
Joined: Mon Sep 06, 2010 8:42 am
First and Last Name: David Gregg
Location: NW oIHo

Re: CC682

Post by OhioBinder »

Kevin
I keep forgetting to get the serial number.
Will have to take a look at the fuel pump. Did consider putting an electric one on it.
I have another 782 that I gained from my Son-in-law when they moved to a house with a small yard. It is rough looking but starts almost instantly and runs great. It is a series II. I also have another one that smokes like a freight train but starts easily and looks great, also a series II.
David Gregg
NW oIHo

User avatar
ReicheP
CCC's Official Weatherman
Posts: 983
Joined: Wed Sep 08, 2010 7:58 pm
First and Last Name: Paul Reiche
Location: Some where over the rainbow, PA

Re: CC682

Post by ReicheP »

A $15 pulse fuel pump will solve your fuel problems.

viewtopic.php?f=4&t=6894
DUI Offenders murder the equivalent of two 747 crashes in the USA each week!

682 W/44" Deck, 1650 W/Snow Blade, 1811 W/450, 1650 Barn Find

OhioBinder
Posts: 149
Joined: Mon Sep 06, 2010 8:42 am
First and Last Name: David Gregg
Location: NW oIHo

Re: CC682

Post by OhioBinder »

Serial number on the 682 is
2050600U717152
I don't know where to find the serial number listings for the Cub Cadet Corporation so I don't know how early this one is.
David Gregg
NW oIHo

User avatar
ksanders
Posts: 930
Joined: Mon Sep 06, 2010 2:56 pm
First and Last Name: Kevin Sanders
Location: Sellersburg, Indiana

Re: CC682

Post by ksanders »

After the U, they started at 700,000 for mtd I believe. So that one's fairly early. I had a 482 once that was 701xxx or something. This part I don't remember but I think there's a serial number for the motor too if you're still trying to figure out series 1 or 2. It's on the fuel pump sheet metal cover right on top of the motor. Something like if it ends in 02, it's series 2. Something like 24002 model number. It's been several years and it's all from memory so sorry I can't be more precise.
From the first Original to the last x82 Series... you can't beat an IH Cub Cadet!!!

Oak
Posts: 126
Joined: Thu Nov 25, 2010 7:40 pm
First and Last Name: Todd O'Connor
Location: Ball Ground, Georgia

Re: CC682

Post by Oak »

Nice 682. Your machine was built in 1983, probably around May or June. 1983 started with ser#712900 and ended with 724524 as per Oscar Will's book.

Marlin
Posts: 43
Joined: Wed Mar 14, 2012 4:02 pm
First and Last Name: Marlin Homrighausen
Location: Colo, Iowa

Re: CC682

Post by Marlin »

That is one beautiful 682. It would be hard decision for me also as to swap it to get your 1650 back. You've made a fantastic score find one with such low one owner hours on it. Congratulations1!!! :beer:

Post Reply