Does anyone know the procedure for adjustment on the Hydro release lever on a 1440? Mine seems to move the same whether the lever is up or down. Maybe a valve stuck or something ?
nicky1
Hydro release lever
-
- Posts: 167
- Joined: Sun Oct 10, 2010 9:04 am
- First and Last Name: Dale Campbell
- Location: Summerville, PA
Re: Hydro release lever
check to make sure there isn't any dirt / grass built up behind the lever on the trans. keeping it from pushing the button in. watch the button to see if it moves and adjust accordingly
-
- Posts: 21
- Joined: Fri Aug 15, 2014 5:11 pm
- First and Last Name: James Nicholson
- Location: Lisbon, OH
Re: Hydro release lever
Thank you much Dale. I have tried to find a service manual on line and have had no luck. This is my first Hydro.dale campbell wrote:check to make sure there isn't any dirt / grass built up behind the lever on the trans. keeping it from pushing the button in. watch the button to see if it moves and adjust accordingly
- SWilliams
- Posts: 805
- Joined: Mon Sep 06, 2010 7:14 pm
- First and Last Name: Steve Williams
- Location: Fort Plain NY (Upstate NY near Cooperstown)
Re: Hydro release lever
Service manual is easy. There isn't one. What they did was to use the service manual for the earlier Cyclops units with some updates. downloads.php?view=detail&df_id=14
Owner of an 1863, 2263 (1863 W 22hp engine!) 2084 and a 2 - 2284s.
"In God we trust, All others pay CASH..."
"In God we trust, All others pay CASH..."