I have come across a Cub on Ebay, please could someone help me identify the model, it is a Cyclops I believe.
Are the front spindles 1" or 3/4", if they are 3/4" is the width of the wheel centre the same as a Cub Cadet 106? As I have a 106 with skinny front wheels and would rather have wider ones.
Thanks
Please help me identify model
-
- Posts: 57
- Joined: Wed Jul 19, 2017 11:31 am
- First and Last Name: Ian Buckwell
- Location: Lymington, Hampshire
Please help me identify model
- Attachments
-
- C__Data_Users_DefApps_AppData_INTERNETEXPLORER_Temp_Saved Images_s-l500(53).jpg (38.53 KiB) Viewed 2736 times
-
- C__Data_Users_DefApps_AppData_INTERNETEXPLORER_Temp_Saved Images_s-l500(55).jpg (33.63 KiB) Viewed 2736 times
-
- C__Data_Users_DefApps_AppData_INTERNETEXPLORER_Temp_Saved Images_s-l500(54).jpg (34.11 KiB) Viewed 2736 times
- SWilliams
- Posts: 806
- Joined: Mon Sep 06, 2010 7:14 pm
- First and Last Name: Steve Williams
- Location: Fort Plain NY (Upstate NY near Cooperstown)
Re: Please help me identify model
Looks like a 1440. Manual lift and hydro drive. One of the first of the cyclops family.
Owner of an 1863, 2263 (1863 W 22hp engine!) 2084 and a 2 - 2284s.
"In God we trust, All others pay CASH..."
"In God we trust, All others pay CASH..."
-
- Moderator
- Posts: 1175
- Joined: Tue Sep 07, 2010 6:22 pm
- First and Last Name: Joe Motuzick
- Location: Torrington Ct
Re: Please help me identify model
Engine looks different, it’s not a 1440 I think they made a 1335? Looks like a single onan to me? Hard to say, either way, nothing will work on the 106 except the rear tires.
- SWilliams
- Posts: 806
- Joined: Mon Sep 06, 2010 7:14 pm
- First and Last Name: Steve Williams
- Location: Fort Plain NY (Upstate NY near Cooperstown)
Re: Please help me identify model
There was a 1340, One year tractor. I've only seen a couple. Those had a single 12.5 Kohler on them. Became the 1440.
Easy way to find out. Look on the silver plate on the left side of the tunnel and post the number on the top row that ends -100
Easy way to find out. Look on the silver plate on the left side of the tunnel and post the number on the top row that ends -100
Owner of an 1863, 2263 (1863 W 22hp engine!) 2084 and a 2 - 2284s.
"In God we trust, All others pay CASH..."
"In God we trust, All others pay CASH..."
-
- Moderator
- Posts: 1175
- Joined: Tue Sep 07, 2010 6:22 pm
- First and Last Name: Joe Motuzick
- Location: Torrington Ct
Re: Please help me identify model
That’s a single for sure... 12 1/2 kohler makes Sence.... 1340 it is!