2082 no start after 18 hp engine swap

This is where we can discuss all the stuff made after IH's sale to MTD.
Post Reply
kbrothers
Posts: 258
Joined: Mon Sep 06, 2010 6:38 am
First and Last Name: Ken Brothers
Location: Ebensburg, PA

2082 no start after 18 hp engine swap

Post by kbrothers »

PTO went out on my 2082 and starter has acted up since I changed it so I decided to pull the motor out of my 1882 mower that the hydro went out on last year. Got the swap finished today but it won't run. I did notice the 2082 engine had an extra wire on the positive starter post which the 1882 didn't all help and info appreciated greatly TIA Ken in PA

User avatar
SWilliams
Posts: 805
Joined: Mon Sep 06, 2010 7:14 pm
First and Last Name: Steve Williams
Location: Fort Plain NY (Upstate NY near Cooperstown)

Re: 2082 no start after 18 hp engine swap

Post by SWilliams »

Here are the wiring diagrams for both.
1882.pdf
(1.79 MiB) Downloaded 209 times
2082.pdf
(1.02 MiB) Downloaded 205 times
Owner of an 1863, 2263 (1863 W 22hp engine!) 2084 and a 2 - 2284s.


"In God we trust, All others pay CASH..."

kbrothers
Posts: 258
Joined: Mon Sep 06, 2010 6:38 am
First and Last Name: Ken Brothers
Location: Ebensburg, PA

Re: 2082 no start after 18 hp engine swap

Post by kbrothers »

Thanks,Steve I think maybe the problem is the 1882 engine is out of a low serial # 314469 tractor? All info I find is for 800000 and up Thanks again

JMotuzick
Moderator
Posts: 1172
Joined: Tue Sep 07, 2010 6:22 pm
First and Last Name: Joe Motuzick
Location: Torrington Ct

Re: 2082 no start after 18 hp engine swap

Post by JMotuzick »

314xxx would make it a Narrow Frame. I’m guessing the s/n is 814xxx. With out looking at the schematic they should have the same wiring....

User avatar
l palma
Posts: 738
Joined: Mon Sep 06, 2010 9:46 am
First and Last Name: Lew Palma
Location: Montague, N.J.

Re: 2082 no start after 18 hp engine swap

Post by l palma »

When you say no start, does it turn over or not?
Both tractors use the same harness, according to this wiring diagram, so here is what I have for you.
Attachments
382012-051518.pdf
(732.29 KiB) Downloaded 213 times
452412-051518.pdf
(730.64 KiB) Downloaded 196 times

kbrothers
Posts: 258
Joined: Mon Sep 06, 2010 6:38 am
First and Last Name: Ken Brothers
Location: Ebensburg, PA

Re: 2082 no start after 18 hp engine swap

Post by kbrothers »

Thanks Lewis Got it running it was a carb issue from setting Then had a pulley issue. Tomorrow I have to find out where the hydro is leaking from-oil all over the floor after mowing and setting overnight

Post Reply