Page 1 of 1

2082 hydraulic fitting leak

Posted: Mon May 28, 2018 10:07 am
by kbrothers
New problem One of the two hydraulic fittings on top the hydro pump is leaking between the fitting sleeve(?) and the tube itself Tried tightening ;didn't help Can I splice a line off another tractor that is bad on opposite end? As always thanks for all input Ken in PA trying to keep the weeds down

Re: 2082 hydraulic fitting leak

Posted: Tue May 29, 2018 10:46 am
by kbrothers
Leaking fitting was caused by a hairline crack under the fitting.Ended up stealing a line off the 1882,it was smashed in in one spot but seems to do the jobCan't figure what caused the line to crack,tho

Re: 2082 hydraulic fitting leak

Posted: Wed May 30, 2018 6:15 am
by dale campbell
years of vibration and flexing when the tractor twists . are the rear axle mounting bolts all tight?

Re: 2082 hydraulic fitting leak

Posted: Thu May 31, 2018 1:41 pm
by kbrothers
Thanks again Dale . I'll take a closer look at bolts Getting harder to work that close to the ground Ken in PA