Super tunnel covers

This is where we can discuss all the stuff made after IH's sale to MTD.
Post Reply
User avatar
SWilliams
Posts: 805
Joined: Mon Sep 06, 2010 7:14 pm
First and Last Name: Steve Williams
Location: Fort Plain NY (Upstate NY near Cooperstown)

Super tunnel covers

Post by SWilliams »

Anyone know off hand if the metal tunnel cover will drop into place on a tractor with a plastic one? I like the metal ones for durability over the plastic.
Owner of an 1863, 2263 (1863 W 22hp engine!) 2084 and a 2 - 2284s.


"In God we trust, All others pay CASH..."

User avatar
Tom Scott
Chief Moderator
Posts: 1762
Joined: Mon Sep 06, 2010 9:11 pm
First and Last Name: Tom Scott
Location: Bentley Springs, Maryland

Re: Super tunnel covers

Post by Tom Scott »

Hi Steve! Hope you are well.

Yes, that was the first change I made to my newer 2182, totally hated that plastic tunnel cover. The earlier metal tunnel cover fits just like it always did, there is no difference with the fit. I also always tap the frame for 1/4"-28 flanged head screws, with a smooth flange so as not to mar the cover with locking serrations. Or if you can only find flange head with the locking serrations, put a flat washer under it. More robust than the dinky factory screws and less susceptible to stripping.
:beer:
1872, 46", 50C decks, Haban dozer blade, 450 snow blower
2182-1, Kwik-Way Loader, 3-pt & rear pto, 442 tiller
2182-2, 54" deck, 551 snow blower
Past tractors:  1541, 2135
<><

User avatar
SWilliams
Posts: 805
Joined: Mon Sep 06, 2010 7:14 pm
First and Last Name: Steve Williams
Location: Fort Plain NY (Upstate NY near Cooperstown)

Re: Super tunnel covers

Post by SWilliams »

Still alive which is a surprise some days. Guess I'll start hunting for a metal one, the plastic one I have is in a few pieces. Already have been replacing things like the rubber fuel lines with steel, running the wiring in conduit and lots of small stuff. Currently working on making the rear three point divorced from the middle lift. Have the dash modified with three hydraulic valves already.
Owner of an 1863, 2263 (1863 W 22hp engine!) 2084 and a 2 - 2284s.


"In God we trust, All others pay CASH..."

User avatar
Tom Scott
Chief Moderator
Posts: 1762
Joined: Mon Sep 06, 2010 9:11 pm
First and Last Name: Tom Scott
Location: Bentley Springs, Maryland

Re: Super tunnel covers

Post by Tom Scott »

That sounds like a real cool project, would make a great project thread. I would love to see your take on dedicated hydraulics for 3 pt. Also, I find the factory rear lift to be just a touch weaker than what would really be useful. I have a carry-all I throw on the back of the loader tractor, but it really can't lift a tremendous amount of weight.
1872, 46", 50C decks, Haban dozer blade, 450 snow blower
2182-1, Kwik-Way Loader, 3-pt & rear pto, 442 tiller
2182-2, 54" deck, 551 snow blower
Past tractors:  1541, 2135
<><

Post Reply