Bought a Disc today

[Amigatec]

Made for a Lo-Boy this is a Model L23 Disc. Correction it's an L38 Model.








Needs a little adjusting.

[Amigatec]

Started building an axle to lift the disc with.



Robbed it from this garden cart.



Welded a brace to the frame.





I have some more bracing to add.

[Amigatec]

Finished the Axle today. Added a few more braces to it.






Using a 12v Electric Actuator to raise and lower it.



You have to add a couple of jumpers to a DPDT switch to reverse it.



Mounted it to the panel under the seat.



Raises and lowers now.

[Amigatec]

Here's a Video of it working.



I have to add a couple of more braces and a 2 chains to level it when up. It will raise about 3" off the ground.

[Amigatec]

I took it out to see if it is high enough, I still need about 2 more inches. I will add an extension onto the arm coming up from the axle.

[Amigatec]

Bend the arm on the back, I didn't know if it would hold or not. I will have to rebuild it.



Then on to the adjustment arms for the gangs.

[Amigatec]

Here is a Video showing me using it. I have a few soft spots and was doing a lot of spinning, but it did work fairly good.

[cub1450]

Pat,

It should pull it just fine we disced our garden last year with a 6 foot ih disc with cub 1782`s cub cadet 1606 (with chains of course)But I got a brinly disc so we sold the ih one.I like the brinly disc more because its smaller and that means more cub time !