Throttle shaft screws
- Farmallgray
- Posts: 1021
- Joined: Mon Sep 06, 2010 7:39 am
- First and Last Name: Todd Markle
- Location: Spring Mills, Pa
Throttle shaft screws
Having brain fade here. What size are the carb throttle shaft screws? I'm thinking 4-40 but I want to make sure.
See my IH, Cub Cadet and tractor pulling youtube videos;
http://www.youtube.com/user/farmallgray
http://www.youtube.com/user/farmallgray
-
- Posts: 1364
- Joined: Mon Sep 06, 2010 2:25 pm
- First and Last Name: Kenneth LaPatta
- Location: Rockingham VT.
Re: Throttle shaft screws
Todd, they are 3-48 x 1/4".
McMaster- Carr has them in brass or stainless.
I'd go with the brass ones and here's a good reason why If a stainless one ever got loose it would cause all kinds of Hell inside
McMaster- Carr has them in brass or stainless.
I'd go with the brass ones and here's a good reason why If a stainless one ever got loose it would cause all kinds of Hell inside
-
- Posts: 295
- Joined: Wed Apr 11, 2012 12:39 pm
- First and Last Name: Ben Michaud
- Location: Richmond, Ontario
Re: Throttle shaft screws
I'll be installing these myself in the not too distant future; is blue loctite a good idea...?
PTWannaHave