2082 no start after 18 hp engine swap
-
- Posts: 258
- Joined: Mon Sep 06, 2010 6:38 am
- First and Last Name: Ken Brothers
- Location: Ebensburg, PA
2082 no start after 18 hp engine swap
PTO went out on my 2082 and starter has acted up since I changed it so I decided to pull the motor out of my 1882 mower that the hydro went out on last year. Got the swap finished today but it won't run. I did notice the 2082 engine had an extra wire on the positive starter post which the 1882 didn't all help and info appreciated greatly TIA Ken in PA
- SWilliams
- Posts: 806
- Joined: Mon Sep 06, 2010 7:14 pm
- First and Last Name: Steve Williams
- Location: Fort Plain NY (Upstate NY near Cooperstown)
Re: 2082 no start after 18 hp engine swap
Here are the wiring diagrams for both.
Owner of an 1863, 2263 (1863 W 22hp engine!) 2084 and a 2 - 2284s.
"In God we trust, All others pay CASH..."
"In God we trust, All others pay CASH..."
-
- Posts: 258
- Joined: Mon Sep 06, 2010 6:38 am
- First and Last Name: Ken Brothers
- Location: Ebensburg, PA
Re: 2082 no start after 18 hp engine swap
Thanks,Steve I think maybe the problem is the 1882 engine is out of a low serial # 314469 tractor? All info I find is for 800000 and up Thanks again
-
- Moderator
- Posts: 1175
- Joined: Tue Sep 07, 2010 6:22 pm
- First and Last Name: Joe Motuzick
- Location: Torrington Ct
Re: 2082 no start after 18 hp engine swap
314xxx would make it a Narrow Frame. I’m guessing the s/n is 814xxx. With out looking at the schematic they should have the same wiring....
- l palma
- Posts: 738
- Joined: Mon Sep 06, 2010 9:46 am
- First and Last Name: Lew Palma
- Location: Montague, N.J.
Re: 2082 no start after 18 hp engine swap
When you say no start, does it turn over or not?
Both tractors use the same harness, according to this wiring diagram, so here is what I have for you.
Both tractors use the same harness, according to this wiring diagram, so here is what I have for you.
- Attachments
-
- 382012-051518.pdf
- (732.29 KiB) Downloaded 217 times
-
- 452412-051518.pdf
- (730.64 KiB) Downloaded 199 times
-
- Posts: 258
- Joined: Mon Sep 06, 2010 6:38 am
- First and Last Name: Ken Brothers
- Location: Ebensburg, PA
Re: 2082 no start after 18 hp engine swap
Thanks Lewis Got it running it was a carb issue from setting Then had a pulley issue. Tomorrow I have to find out where the hydro is leaking from-oil all over the floor after mowing and setting overnight