2082 hydraulic fitting leak

This is where we can discuss all the stuff made after IH's sale to MTD.
Post Reply
kbrothers
Posts: 258
Joined: Mon Sep 06, 2010 6:38 am
First and Last Name: Ken Brothers
Location: Ebensburg, PA

2082 hydraulic fitting leak

Post by kbrothers »

New problem One of the two hydraulic fittings on top the hydro pump is leaking between the fitting sleeve(?) and the tube itself Tried tightening ;didn't help Can I splice a line off another tractor that is bad on opposite end? As always thanks for all input Ken in PA trying to keep the weeds down

kbrothers
Posts: 258
Joined: Mon Sep 06, 2010 6:38 am
First and Last Name: Ken Brothers
Location: Ebensburg, PA

Re: 2082 hydraulic fitting leak

Post by kbrothers »

Leaking fitting was caused by a hairline crack under the fitting.Ended up stealing a line off the 1882,it was smashed in in one spot but seems to do the jobCan't figure what caused the line to crack,tho

dale campbell
Posts: 167
Joined: Sun Oct 10, 2010 9:04 am
First and Last Name: Dale Campbell
Location: Summerville, PA

Re: 2082 hydraulic fitting leak

Post by dale campbell »

years of vibration and flexing when the tractor twists . are the rear axle mounting bolts all tight?

kbrothers
Posts: 258
Joined: Mon Sep 06, 2010 6:38 am
First and Last Name: Ken Brothers
Location: Ebensburg, PA

Re: 2082 hydraulic fitting leak

Post by kbrothers »

Thanks again Dale . I'll take a closer look at bolts Getting harder to work that close to the ground Ken in PA

Post Reply