782 snow / dozer blade

Here is where we can talk about all things Cub and then some. Please follow the golden rule and respect others.
This is a free forum and all pictures posted here are for public consumption. They are free to be used as long as you are not using them in a for-profit manner. Also, any pictures subject to copyright or permissions will be removed.

782 snow / dozer blade

Postby J Hayes » Fri Dec 17, 2010 1:37 am

I started here, went across the street, and went around the block. I see no info on what number is the correct snow / dozer blade or the proper undercarriage of what will fit. did see something about 1200 or 1250 series by IH. can anyone tell what I need for the 782?
My mind wants a Divorce ?? .
User avatar
J Hayes
 
Posts: 912
Joined: Mon Sep 06, 2010 6:20 pm
City and State: Apollo Pa
First and Last Name: Jim Hayes

Re: 782 snow / dozer blade

Postby vince_o » Fri Dec 17, 2010 5:19 am

Should be a wide frame under carriage.

But what do I now, please read my disclaimer in my contract.
"It's a damn poor mind that can only think of one way to spell a word."
-Andrew Jackson
User avatar
vince_o
Moderator
 
Posts: 1948
Joined: Mon Sep 06, 2010 3:20 am
City and State: Pickens, SC
First and Last Name: Vince Ochiuto

Re: 782 snow / dozer blade

Postby ReicheP » Fri Dec 17, 2010 7:28 am

1250/1650/782 for a snow blade under carriage, they interchange.
DUI Offenders murder the equivalent of two 747 crashes in the USA each week!

682 W/44" Deck, 1650 W/Snow Blade, 1811 W/450
User avatar
ReicheP
CCC's Official Weatherman
 
Posts: 534
Joined: Wed Sep 08, 2010 7:58 pm
City and State: Some where over the rainbow, PA
First and Last Name: Paul Reiche

Re: 782 snow / dozer blade

Postby mmzullo » Fri Dec 17, 2010 7:54 am

I put a under carrige from a wf on an 1811 without any prblems.
User avatar
mmzullo
 
Posts: 317
Images: 22
Joined: Mon Sep 06, 2010 5:18 pm
City and State: Kinnelon,NJ
First and Last Name: Mike Marzullo

Re: 782 snow / dozer blade

Postby rweaver » Fri Dec 17, 2010 9:13 am

there are 5 styles of snowblade mounts original spring trip,70 to 123 style, narrow frame quick tach,wide frame,and the last one is the late cyclops for the high axle in later plastic nose tractors
rweaver
 
Posts: 459
Joined: Mon Sep 06, 2010 6:58 pm
City and State: Stevens, PA
First and Last Name: Ray Weaver

Re: 782 snow / dozer blade

Postby J Hayes » Fri Dec 17, 2010 2:58 pm

So are we safe in saying any undercarriages will work as long as it is a from WF IH series without any fabrication.
Prior to the Plastic era ?
My mind wants a Divorce ?? .
User avatar
J Hayes
 
Posts: 912
Joined: Mon Sep 06, 2010 6:20 pm
City and State: Apollo Pa
First and Last Name: Jim Hayes

Re: 782 snow / dozer blade

Postby ksanders » Fri Dec 17, 2010 3:34 pm

Yes, except the lift brackets are different. The x82 series has a slot and and takes a bigger lift rod as well. There might even be a wider and narrower lift bracket for mowers prior to the x82 series. I've seen wider and narrower ones both on WF blades.
From the first Original to the last x82 Series... you can't beat an IH Cub Cadet!!!
User avatar
ksanders
 
Posts: 718
Joined: Mon Sep 06, 2010 2:56 pm
City and State: Memphis, IN
First and Last Name: Kevin Sanders

Re: 782 snow / dozer blade

Postby J Hayes » Fri Dec 17, 2010 10:47 pm

Fellow plans to bring this one tomorrow doesn't know what its for maybe someone can ID it ?
You do not have the required permissions to view the files attached to this post.
My mind wants a Divorce ?? .
User avatar
J Hayes
 
Posts: 912
Joined: Mon Sep 06, 2010 6:20 pm
City and State: Apollo Pa
First and Last Name: Jim Hayes

Re: 782 snow / dozer blade

Postby Jlaws » Fri Dec 17, 2010 11:29 pm

Not 100% sure , but the subframe looks like a narrow frame mount Jim .
But the subframe could be changed over to a wideframe mount .
I see a lot of cub cadets while going down the tracks , its a shame I can't pull over and ask about them .
User avatar
Jlaws
 
Posts: 841
Images: 13
Joined: Sun Sep 05, 2010 10:14 pm
City and State: Independence , Ky
First and Last Name: Jess Laws

Re: 782 snow / dozer blade

Postby red82s » Sat Dec 18, 2010 5:23 pm

How long should the lift rod be for a 782? Mine that I just got is 27" and too short. I think it was maybe for a 149 etc... I"m thinking around 30" or so but an accurate number would help. thanks
Adrian
User avatar
red82s
 
Posts: 118
Joined: Mon Sep 06, 2010 2:45 pm
City and State: Georgetown, KY
First and Last Name: Adrian Gitch

Re: 782 snow / dozer blade

Postby LEVI » Sat Dec 18, 2010 6:00 pm

Adrian, the lift rod should be 28" long.
LEVI
 
Posts: 132
Joined: Tue Sep 14, 2010 7:32 pm
City and State: Earlville,NY
First and Last Name: Levi Day

Re: 782 snow / dozer blade

Postby VScott » Sat Dec 18, 2010 6:03 pm

Adrian, I just checked my 782 and 1811. both are 44" blades and both lift rods are 30" overall length. Be glad to post pics if you need them.
VScott
 
Posts: 207
Joined: Wed Sep 15, 2010 8:47 pm
City and State: St.Louis, Mo
First and Last Name: V Scott

Re: 782 snow / dozer blade

Postby BThein » Sat Dec 18, 2010 6:11 pm

Sure looks like a narrow subframe to me ,but like others have said it can be changed very easy .I will try to post a pic of a wide frame one, you can see how the ends kick up on the wide ones .
Bob
You do not have the required permissions to view the files attached to this post.
BThein
 
Posts: 11
Joined: Mon Sep 13, 2010 3:40 pm
City and State: Stroudsburg,Pa.
First and Last Name: Bob Thein

Re: 782 snow / dozer blade

Postby l palma » Sat Dec 18, 2010 6:20 pm

Jim,
That one looks like a narrow frame,
I have seen some wide frames with the forks bent out,seems the P.O's thought they mounted to the outside of the frame.
You know,I was wondering the same thing,My 782 came with the correct lift bar and the slotted lift bracket,but it seems to lift the plow about 4" of the ground,I was going to get a nos one for my narrow and wide frame,but some guy from Ohio found my stash....cleaned the dealer out.
User avatar
l palma
 
Posts: 634
Joined: Mon Sep 06, 2010 9:46 am
City and State: Montague, N.J.
First and Last Name: Lew Palma

Re: 782 snow / dozer blade

Postby J Hayes » Sun Dec 19, 2010 3:19 pm

Ok I got that Blade But not Happy for the tools and such that I have would not be feasible to re fab.pins turn to the inside and inch and a half too narrow

I do have a 3# hammer 2 Mig welders that I can't run either of them. some bailing wire, and a burnz amatic torch . :)

I don't think changing the sub frame would work either as the mounting plate for the up and down hinge looks wider at the front of the sub frame itself .

So it looks like I got either a chunk of trading stock or an expensive piece of scrap. :(
My mind wants a Divorce ?? .
User avatar
J Hayes
 
Posts: 912
Joined: Mon Sep 06, 2010 6:20 pm
City and State: Apollo Pa
First and Last Name: Jim Hayes

Re: 782 snow / dozer blade

Postby mgonitzke » Sun Dec 19, 2010 5:04 pm

The subframes are interchangeable between WF and NF. The blade part is the same.
Original, 582 w/ 18 hp Kohler Command, 682 w/ Kwik-Way loader, 782, 782D, 1872 My Cub Site
User avatar
mgonitzke
 
Posts: 392
Joined: Mon Sep 06, 2010 5:43 pm
City and State: Wichita, KS
First and Last Name: Matt Gonitzke


Return to Cub Cadets and Shooting the Breeze

Who is online

Users browsing this forum: No registered users and 1 guest

cron